A- 0028 Control Signal Bit 3 Invalid - Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS Functional Description

12-66
Diagnostic Message Descriptions

A- 0028 Control signal bit 3 invalid

A- 0029 Control signal bit 4 invalid
The function was activated in Parameters AA14 and AA17, to compare
PLS positions with a particular state of an input signal. The state of the
input signal from Parameter AA17 did not correspond to the PLS position.
Check input signal and PLSs.
The function was activated in Parameters AA14 and AA18, to compare
PLS positions with a particular state of an input signal. The state of the
input signal from Parameter AA18 did not correspond to the PLS position.
Check input signal and PLSs.
ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P