10.2 Serial Interface; Overview - Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS Functional Description

10-14
Interface

10.2 Serial Interface

Overview

Interface Mode
Interface Protocol
The drive controller is equipped with a serial interface. This interface is
used to program the drive. The following can be exchanged via this
interface:
•
Parameter
•
Programs
•
Logic Task
•
Cam
•
Status Information
•
Commands
These data are numbers-oriented and a single transfer occurs.
The interface can operate optionally in either
• RS232 Mode or
• RS485 Mode
Three different protocols are supported:
• Indramat SIS Protocol
user data transmitted in INTEL format
• ASCII Protocol
The precise structure is outlined in the following section.
• IDS protocol (RS232)
In conjunction with the Indramat IDS01 decade switch.
ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P