Task Table - Avaya DEFINITY Server R Manual

Task Table

Survivable Remote EPNs
Check if Survivable Remote EPNs are installed and accessible. The upgrade
outage may place the SREPNs into survive mode. After the upgrade, you need to
switch them back to normal mode. Refer to Installation and Maintenance for
Survivable Remote EPN for DEFINITY Servers.
Wireless Systems
If the system uses Wireless Business System, you need to re-enable the radio
controllers after the upgrade. Refer to Chapter 1, "UTAM Disablement" in the
DEFINITY Wireless Business System Maintenance book. Refer also to Chapter 2,
"Switch Administration" in Definity Wireless Business System Installation and
Test.
NOTE:
This activity can only be performed with the init login.
Customer Requirements
Customers who have a TN750B or earlier announcement circuit pack must back
up the announcements before the upgrade. The Avaya field technician will not do
this step.
Only the contents of one integrated announcement board can be saved to
removable media. Backing up multiple announcement boards requires multiple
removable media. Integrated announcement boards require administered data
modules to successfully save announcements to removable media.
Task Table
Table 2-2 lists the high-level tasks to perform the upgrades. Refer to the
appropriate page for instructions for each step.
The upgrade procedure is similar for both the standard and high or critical
reliability system with a few exceptions. These exceptions are noted as you go
through the steps.
555-233-115 Issue 5 October 2002
2-5