Avaya DEFINITY Server R Manual page 255

Complete the Upgrade
15. In the Alarm Destination field, choose
16. Click on the Continue Registration button at the bottom of the page.
ART begins automatically registering the product and displays progress
messages to indicate the current status.
!
If the preceding steps have been completed successfully, ART displays the
DEFINITY Upgrade Registration Report.
17. Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234,
selecting prompt, 2, prompt 6, then prompt 2) immediately for assistance.
18. Save the DEFINITY Upgrade Registration Report in a file for future
reference or print the report and keep the copy.
Check Customer Options
1. Type display system-parameters customer-options and press
set the customer options that were purchased.
Ensure that the G3 version: field is V11.
2. If the customer was using Supplementary Services Protocol b or d on an
ISDN-PRI trunk group before the upgrade, go to screen 7, QSIG Optional
Features, and ensure that the Basic Call Setup field is y.
555-233-115
DON'T CHANGE to leave the product's currently-administered
alarm origination number unchanged (the common choice for
upgrades).
SET NUMBER TO and type the complete alarm destination
telephone number, including any dialing prefix (for example, "9" or
"*9"). The default value in this field is the TSO-Denver number
(18005353573).
CAUTION:
DO NOT exit your browser or click on the Refresh, Back, Stop, or
Home buttons while ART displays these progress messages.
If you have to abort your registration, click on the Abort Session
button that appears with one of the progress messages.
Enter
Issue 5 October 2002
to
5-63