Installing And Wiring Telephones; Wiring Telephones; Task List: Wiring Examples And Wiring Procedures - Avaya S8700 Manual

Installing and Wiring Telephones

The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples
only; actual wiring procedures may vary at each site.
After installing the hardware, the data for the telephone features must be administered. These
procedures are provided in the Administrator's Guide for Avaya MultiVantage Software.
NOTE:
Refer to the Installation for Adjuncts and Peripherals for Avaya MultiVantage Solutions to
install the necessary peripheral equipment.

Wiring Telephones

Task List: Wiring Examples and Wiring Procedures

• ''Connect Telephones'' on page 106
''Analog Tie Trunk Example'' on page 111
•
• ''Digital Tie Trunk Example'' on page 111
''DS1 Tie Trunk Example'' on page 112
•
• ''Auxiliary Connector Outputs (MCC1 and SCC1 media gateways only)'' on page 115
• ''Three-Pair and Four-Pair Modularity'' on page 118
''Adjunct Power Connection Locations'' on page 119
•
• ''Attendant Console Example'' on page 120
• ''Connect External Alarm Indicators and Auxiliary Power'' on page 123
''Connect Power Distribution Unit External Alarm Wires'' on page 124
•
• ''Remote Access'' on page 127
''Off-Premises or Out-of-Building Stations'' on page 128
•
''Emergency Transfer Units and Associated Telephones'' on page 134
•
• ''808A Emergency Transfer Panel and Telephone Installation Examples'' on page 135
''Install External Ringing'' on page 144
•
• ''Install the Queue Warning Indicator'' on page 145
''Installing and Wiring Telephone Power Supplies'' on page 146
•
Refer to the Job Aid entitled
information on pinouts.
Connector and Cable Diagrams (Pinout Charts)
May 2002
Installing the S8700 IP Connect
for
105