Table of Contents
Advertisement
Adding or Removing Cabinet Hardware
5. When done, click OK, OK.
Upgrade to TN802B
NOTE:
The upgrade takes about 20 minutes.
1. Insert the flash disk into the right most slot on the TN802 IP trunk. On the
monitor, a dialog box assigns a drive letter with the removable media
designation; the default is D:.
2. Right click on Start > Explore to open the Windows NT Exploring pane
and select the drive letter indicated in step 1.
3. Double-click on Medpro and select the Setup icon.
7-98
Issue 5 October 2002
555-233-115
Advertisement
Chapters
Table of Contents
Troubleshooting
