Avaya DEFINITY Server R Manual page 490

Adding or Removing Cabinet Hardware
Connect the Modem
NOTE:
These instructions are for connecting the U.S. Robotics modem supplied to
U.S. customers only. If using a different modem, follow the manufacturer's
instructions on connecting the modem.
1. Connect the RS232 port of the modem to the MODEM connector of the
TN802B external cable assembly.
2. Connect an analog telephone line to the left most analog-line port on the
modem as shown in
3. Make sure that the modem's DIP switches are set as shown in
Figure 7-10
4. Plug the modem into an AC power outlet.
5. Turn on the modem using the switch on the front of the modem.
Figure Notes
1. Connect analog line here.
2. DIP switch 5 must be up.
Figure 7-10. External Modem Connections for U.S. Robotics Modem
7-74
Issue 5 October 2002
NOTE:
Check the labels near the connectors; the MODEM and COM2
connectors look the same.
Figure
and Table 7-12.
1
2
1 2 3 4 5 6 7 8
7-10.
3
3. Connect MODEM connector here.
4. Connect power connector here.
4
modfrobo KLC 030499
555-233-115