Avaya DEFINITY Server R Manual page 513

Add IP Solutions
5. If upgrading locally, reboot Windows NT by pressing the recessed reset
button on the faceplate (see
the LCD shows a flashing MSHUT *. When the flashing stops and the
asterisk disappears (about 2 min), it is safe to remove the circuit pack.
6. After the TN802B is shut down, reseat the circuit pack to restart the
system.
7. Log in using ctrl alt del
Upgrading IP trunks to H.323 trunks
If there are existing IP trunk connections that you want to upgrade to H.323 trunk
connections, do the following steps. Otherwise, go to
page 7-98
To upgrade an existing IP trunk (R7) to an H.323 trunk (R8) requires first getting
IP information from the existing TN802 before upgrading the TN802 to TN802B.
1. Click on My Computer > Control Panel > Network.
2. Click the Protocols tab.
3. Select TCP/IP Protocol from the list.
4. Click the Properties option in the Network window . Write down the IP
address, subnet address, and gateway address shown for adaptor [2] (see
example below).
555-233-115
NOTE:
Do not use the addresses for adapter [1].
Figure 7-15) of the TN802B IP Interface until
''Upgrade to TN802B'' on
Issue 5 October 2002
7-97