Avaya DEFINITY Server R Manual page 484

Upgrades and additions

Hide thumbs Also See for DEFINITY Server R:

Table of Contents

Adding or Removing Cabinet Hardware

change ip-interfaces

Inter-region IP connectivity allowed?

2. Set the Enable Eth Pt field to n.

4. Type change ip-interfaces and press

5. Delete the information in the Type, Slot, and Node Name fields for each

TN802B you are replacing.

Remove the Circuit Packs

When adding or replacing any hardware, be sure to ground yourself against

electrostatic discharge (ESD) by wearing a grounded wrist strap.

The TN799B/C, TN802B, and TN2302AP circuit packs are hot-swappable,

so you do not need to power down the carrier to remove or install them.

If replacing the existing TN799 circuit pack, remove it first and replace it with

the TN799C. If you have a TN799B, you do not need to replace it for the

TN2302AP to work. You do need a TN799C if you want to be able to

download new firmware to the TN2302AP.

1. Press the recessed Reset button on the TN802B circuit pack until MSHUT*

starts flashing on the LCD. When MSHUT* is in a steady state, it is safe to

remove the circuit pack.

2. Remove the TN799B and TN802B circuit packs.

Issue 5 October 2002

IP INTERFACES

Code Sfx Node Name

to save the changes.

to save the information and effect the new settings.

255.255.255.0

Gateway Address Rgn

192.168.10 .21

Chapters

Table of Contents