Avaya DEFINITY Server R Manual page 284

Upgrading a Multicarrier G2 Universal Module to Avaya
DEFINITY Server R EPN running Avaya MultiVantage
Software
9. In the Customer Type field, select
10. Click on the Continue Upgrade Registration button.
The DEFINITY Product List page appears.
11. Look in the product table (first column heading is "#") to find the row for the
product that you want to register. Click on the number in the far-left column
("#") of the correct row.
If the product is not shown in the table, or if you are not sure whether a
listed product is the one you want to register, contact the DBA group for
assistance (1-800-248-1234, selecting prompt, 2, prompt 6, then prompt
2).
Four new fields appear.
12. In the Data Lock field, choose:
13. In the Dialing Type field choose the dialing type that the product will use to
report alarms:
14. In the Alarm Origination field choose:
5-92
Issue 5 October 2002
GOODYEAR, MOTEL 6, STATE FARM
IN CINCINNATI BELL SERVICE AREA
OTHER
NOTE:
This verification might be done automatically in the future.
NOTE:
It might be helpful to identify the product by looking at the Product
Nickname, Product Alarm ID, INADS Number, Serial Number, or IP
Address columns in the table.
YES for products with ASG enabled
NO for all others
DON'T CHANGE to leave the product's dialing type unchanged
TONE for DTMF dialing
PULSE for rotary or pulse dialing
DON'T CHANGE to leave the product's current alarm origination
status unchanged (the common choice for upgrades).
YES to enable alarm origination.
NO for no alarm origination.
555-233-115