Avaya DEFINITY Server R Manual page 360

Adding New Carriers and EPN Cabinets
2. Slide the tool to the rear of the cabinet. See
Figure 6-18. Insert the Pass-thru Tool
!
CAUTION:
Avoid bending fiber optic cables to a radius smaller than 1.5 inches
(3.8 cm), to prevent mechanical stress on the cables.
!
CAUTION:
During the actual installation of fiber optic components, use either all beige
or all blue adapters. Beige denotes multimode fiber and blue denotes
single-mode fiber. Do not mix beige with blue.
6-40
Issue 5 October 2002
Figure 6-18.
lcda2fop RPY 021098
555-233-115