Avaya DEFINITY Server R Manual page 142

Upgrading R5si/R6si to an Avaya DEFINITY Server R
EPN running Avaya MultiVantage Software
Busyout MMI Circuit Packs (H/C only)
!
CAUTION:
Multimedia-to-voice station calls are not preserved on an upgrade. Failure to
busy-out the TN787 Multimedia Interface (MMI) circuit packs results in
unusable TN787 and TN788 Multimedia Voice Conditioner ports.
1. Type display system-parameters customer-options and press
screen 2 under the Multimedia Call Handling (MMCH) options, check the
Basic and Enhanced fields.
2. If either the Basic or Enhanced field is y, type list configuration all and
press
3. If there are MMI circuit packs, type busyout board UUCSS for each circuit
pack.
Save Translations
1. Type save translation and press
from memory to the translation flashcard, which takes about 2 minutes.
Save Announcements (if necessary)
NOTE:
The TN750C and TN2501AP Integrated Announcement circuit packs store
announcements in nonvolatile memory; saving the announcements is
optional.
1. If the PPN contains a TN750/B Announcement circuit pack, type display
announcements and press
2. If administered recorded announcements are listed, type save
announcements UUCSS and press
about 30 minutes.
3. Remove the translation card and install the backup flashcard.
4-16
Issue 5 October 2002
to locate all MMI (TN787) circuit packs.
Enter
NOTE:
For some software loads, type save announcements from UUCSS.
Type help and press
Enter
to write all translation information
Enter
.
Enter
. For example, 01D03. This takes
Enter
for complete command usage.
. On
Enter
555-233-115