Avaya DEFINITY Server R Manual page 308

Upgrades and additions
Hide thumbs Also See for DEFINITY Server R:
Table of Contents

Advertisement

Upgrading a Multicarrier G2 Universal Module to Avaya
DEFINITY Server R EPN running Avaya MultiVantage
Software
For Either 1 or 2 Collocated Expansion Port Networks
1. At control carrier A of PPN cabinet 1 (see
2. Behind control carrier A of EPN cabinet 2:
3. Behind control carrier B of PPN cabinet 1:
4. Behind port carrier B of EPN cabinet 2:
For 2 Collocated Expansion Port Networks
1. Behind control carrier A of PPN cabinet 1:
5-116
Issue 5 October 2002
Install a lightwave transceiver on the cable connector at slot 1A01.
Connect a fiber optic cable to the transceiver just installed.
Carefully attach the fiber optic cable (with cable ties) to the wall of
the cable tray at the built-in cable tie positions.
Install a lightwave transceiver on the cable connector at slot 2A01.
Connect the other end of the fiber cable to the transceiver just
installed.
Carefully attach the fiber optic cable (with cable ties) to the wall of
the cable tray at the built-in cable tie positions.
At the top of the cabinet, coil the surplus fiber optic cable and attach
it to the wall of the cable tray.
Install a lightwave transceiver on the cable connector at slot 1B01.
Connect a fiber optic cable to the transceiver just installed.
Carefully attach the fiber optic cable (with cable ties) to the wall of
the cable tray at the built-in cable tie positions.
Install a lightwave transceiver on the cable connector at slot 2B02.
Connect the other end of the fiber cable to the transceiver just
installed.
Carefully attach the fiber optic cable (with cable ties) to the wall of
the cable tray at the built-in cable tie positions.
At the top of the cabinet, coil the surplus fiber optic cable and attach
it to the wall of the cable tray.
Install a lightwave transceiver on the cable connector at slot 1A02.
Connect a fiber optic cable to the transceiver just installed.
Carefully attach the fiber optic cable (with cable ties) to the wall of
the cable tray at the built-in cable tie positions.
Figure 5-28
through
Figure
555-233-115
5-31):

Advertisement

Table of Contents
loading

Table of Contents