Avaya DEFINITY Server R Manual page 431

Upgrades and additions
Hide thumbs Also See for DEFINITY Server R:
Table of Contents

Advertisement

Downloading Firmware to Port Circuit Packs
Table 7-5. Firmware Download fields and descriptions (Continued)
Field
Remove Image File
After Successful
Download
Start Date/Time
Stop Date/Time
Target Location
3. Submit the schedule.
If you set the Schedule Download field to n, the download starts as soon
as you submit the schedule.
!
555-233-115
Description
Type y if you want the procedure
to automatically remove the new
firmware image file [default].
Type n if you do not want the new
firmware image file removed.
Type the date and time that you
want the firmware download to
begin.
Type the date and time that you
want the firmware download to
end.
Type the UUCSS address of the
circuit pack that you are
updating.
NOTE:
If you receive a SAT error message asking you to use the command,
test firmware download, this means that there was a problem with a
previous firmware download. Run the test before proceeding.
CAUTION:
Unless the Remove Image File After Successful Download
field is set to y, the ftplogin and ftppassword remain on the TN799DP
(C-LAN) and TN2501AP (VAL) circuit packs either until they are reset
or until you issue the disable filesystem board UUCSS command.
Notes
At the completion of a successful
download, the procedure
automatically removes the new
firmware image file from the source file
system, freeing up the memory on the
source circuit pack. We recommend
using the default setting.
If field is set to n, you must manually
remove the new firmware image file
from the source file system after the
download has completed. See
''Disable file system'' on page
7-24
.
''Check specified
See the section,
resources'' on page 7-16
that the necessary resources are
available.
If the scheduled stop time is reached
before the new firmware image file has
been downloaded to every circuit
pack, the system finishes downloading
to the circuit pack in progress before
aborting the remainder of the
download schedule.
For a self-download, this circuit pack
must reside in the same location as
the source pack. You can only put
one entry in this field.
Continued on next page
Issue 5 October 2002
, to ensure
7-15

Advertisement

Table of Contents
loading

Table of Contents