Avaya DEFINITY Server R Manual page 323

Add MCC Port Carriers
Save Translations
1. Log in at the management terminal.
2. If the system is high- or critical-reliability, type status spe and press
verify that the standby SPE is refreshed and that the standby disk is in
service.
3. Type save translation [spe-a or both] disk and press
command instructs the system to take all translation information in memory
and write it to the disk(s).
4. If the MCC port network contains a TN750/B Announcement circuit pack,
type display announcements and press
If administered recorded announcements are listed, type list
configuration software-version and press
out when the announcements were last saved.
Save the current announcements by typing save announcements and
pressing
5. Type backup disk [spe-a or both] and press
the system to backup the current information on disk to the system tape(s).
6. Update backup tape(s), if required.
Shut Down DEFINITY LAN Gateway System
If a DEFINITY LAN Gateway system resides in the control cabinet to be
upgraded, prepare to shut down the DEFINITY LAN Gateway assembly and allow
the disk to completely spin down.
!
CAUTION:
Make sure that you save the system parameters if you plan to reuse the
current system.
!
WARNING:
Neglecting to shut down a DEFINITY LAN Gateway assembly before
powering down the system cabinet where it resides can damage the LAN
Gateway disk.
1. Unseat the LAN Gateway assembly from its backplane connectors in the
carrier.
2. Log onto the DEFINITY LAN Gateway. See the DEFINITY
Communications System Generic 3 Installation, Administration and
Maintenance of CallVisor ASAI over the DEFINITY LAN Gateway.
3. When the main menu appears, select Maintenance.
4. Select Reset System from the Maintenance menu.
5. Select Shutdown from the Reset System menu.
555-233-115
.
Enter
. This
Enter
.
Enter
. Check screen 2 to find
Enter
. This command instructs
Enter
Issue 5 October 2002
to
Enter
6-3