Avaya DEFINITY Server R Manual page 430

Adding or Removing Cabinet Hardware
2. Fill in the fields listed in
Table 7-5. Firmware Download fields and descriptions
Field
Source Boards
Location
Firmware Image
File Name
Target Board Code
Suffix
Firmware Vintage
Schedule Download
7-14
Issue 5 October 2002
Table
Description
Type the UCCSS address of the
source circuit pack.
Type the complete filename
(including file extension) of the
new firmware image file.
Type the circuit pack ID, for
example "TN2501."
NOTE:
Do not type the "AP" suffix.
Examples:
For VAL (TN2501AP), type
AP.
For C-LAN (TN799DP), type
DP.
For DS1 (TN464GP), type
GP.
This is a display-only field for
TN799DP (C-LAN) and
TN2501AP (VAL).
Type y to schedule the firmware
download for another time.
Type n to start the firmware
download immediately after
completing the form.
7-5:
Notes
Screen 7-1
See
''Verify files'' on page 7-13
Self-download:
This must be the same circuit pack
type as the source circuit pack. You
cannot mix circuit-pack types.
Remote-download:
This must be the same circuit pack as
the target circuit pack.
Once the firmware download begins,
you cannot make any changes to this
form.
If you answer n(o), then the
Date/Time and
fields do not appear.
Date/Time
The download begins as soon as you
press .
Enter
Continued on next page
in the section
.
Start
Stop
555-233-115