Re-Record Announcements (If Necessary); Rerecord Announcements - Avaya DEFINITY Server R Manual

Install the MCC1 Cabinets
Set Locations
After you set the daylight savings rules, you must set the locations for all switches.
It is possible to have switches in different time zones.
1. Type change locations and press
ARS Prefix 1 Required for 10-Digit NANP Calls? _
Number Name
1 Main________________
2 ____________________
3 ____________________
4 ____________________
5 ____________________
6 ____________________
7 ____________________
8 ____________________
9 ____________________
10 ____________________
11 ____________________
12 ____________________
13 ____________________
14 ____________________
2. Type y in the ARS Prefix 1 Required for 10-Digit NANP
Calls? field.
3. Type the information in the various fields for each switch.
4. Press

Re-Record Announcements (if necessary)

1. Refer to Administrator's Guide for Avaya MultiVantage Software to record
announcements.
555-233-115
LOCATIONS
Timezone
Offset
+ 00:00
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
_ __:__
NOTE:
Use the name of the switch or "Local Switch" in the Name field for the
first location.
to effect the changes.
Enter
NOTE:
A TN750C Announcement circuit pack stores announcements in
nonvolatile memory; re-recording the announcements is not needed.
.
Enter
Page 1 of 3
Daylight-Savings
Rule
_1
__
__
__
__
__
__
__
__
__
__
__
__
__
Issue 5 October 2002
Number Plan
Area Code
303
___
___
___
___
___
___
___
___
___
___
___
___
___
3-19