Interconnect Port Networks With Fiber Optic Cabling - Avaya DEFINITY Server R Manual

Upgrading a Multicarrier G2 Universal Module to Avaya
DEFINITY Server R EPN running Avaya MultiVantage
Software
Save Translations
1. Type save translation and press
disk. If the translations were corrupted during the upgrade, the following
error message displays when logging in:
!
Back Up Disk
1. Type backup disk and press
2. Type test stored-data long and press
verify the consistency of the MSS files (on the disk and removable media).
Return Replaced Equipment
Return replaced equipment to Avaya.
Interconnect Port Networks with Fiber
Optic Cabling
Three reliabilities:
''Standard Reliability'' on page 5-94
''High Reliability'' on page 5-103
''Critical Reliability'' on page 5-114
Standard Reliability
Fiber optic cabling terminated to 9823A lightwave transceivers can interconnect
PNs up to 4,900 feet (1493 m) apart. Fiber optic cabling terminated to 9823B
lightwave transceivers can interconnect PNs up to 25,000 feet (7620 m) apart.
The 300A fiber optic lightwave transceiver can interconnect PNs up to
115,000 feet (21.7 miles, 35 km) apart.
NOTE:
These distance limits are approximate measurements of the actual fiber
right-of-way (not of the shortest linear distance) between the 2 endpoints.
5-94
Issue 5 October 2002
WARNING:
Translation corruption detected; call Avaya distributor immediately.
NOTE:
The save translation command cannot function if the translation
corruption message appears. See
page B-1.
to get upgraded translations onto
Enter
''Troubleshooting an Upgrade'' on
to backup all changed files.
Enter
. This instructs the system to
Enter
555-233-115