Avaya DEFINITY Server R Manual page 138

Upgrading R5si/R6si to an Avaya DEFINITY Server R
EPN running Avaya MultiVantage Software
Have direct connection
NOTE:
If you are upgrading from Release 10 to Avaya MultiVantage Software, omit
this section.
If you have a direct connection between RFA and the switch and you are
upgrading from Release 9 to Avaya MultiVantage Software:
1. Using your RFA Job Aids, run the Features Extraction Tool (FET) from the
RFA website to create a Switch Configuration File.
2. When prompted, type in the Transaction ID number.
3. The FET creates and uploads the Switch Configuration File automatically.
4. Do not deliver the License File at this time. You will deliver and install it
later in this upgrade procedure.
No direct connection
NOTE:
If you are upgrading from Release 10 to Avaya MultiVantage Software, omit
this section.
If you do not have a direct connection between RFA and the switch and you are
upgrading from Release 9 to Avaya MultiVantage Software:
1. Run the Features Extraction Tool (FET) from your laptop/PC to create a
Switch Configuration File.
2. When prompted, type in the Transaction ID number.
3. Use the FET instructions to create a new switch connection profile.
4. Create the Switch Configuration File.
5. Upload the Switch Configuration File to the RFA website.
6. Deliver the License File to your laptop/PC for installation later in this
procedure.
If you have problems with RFA
If you get an error message that a hardware serial number is not in the SAP
database, you must call the RFA Helpdesk
SAP information.
4-12
Issue 5 October 2002
(Table 4-4) to have them correct the
555-233-115