Avaya DEFINITY Server R Manual page 426

Adding or Removing Cabinet Hardware
Download Web's image to local staging area
For a download from the Web, you need a temporary staging area to store the
firmware images before uploading them to the source circuit pack. Although this
download is normally done from a PC, you can also use other server types, such
as UNIX.
1. Go to the Avaya Customer Support Web site (http://support.avaya.com).
2. Select the Online Services link near the top left of the page.
3. Select Software/Firmware Downloads.
4. A page with a large table appears.
5. Find and click on the following table entry:
Grouping
Communication Systems
6. The main MultiVantage Firmware Download page appears.
7. Select the circuit pack you want to upgrade, then the firmware images that
you need (there may be more than one, depending on the circuit pack).
8. For example, the tn2501ap_f05.bin filename is for the TN2501AP (VAL)
circuit pack.
9. Download the file to the directory where you will launch the FTP
application.
Pre-upload checks
At the SAT:
1. Enter change permissions login.
Ensure that the Administer Features field is y on the Command
Permissions Categories screen.
2. Get the source circuit pack's IP address either from the data systems
administrator or by typing the following SAT commands:
a. If you know the circuit pack's address, enter list configuration
b. Check that these ports are enabled:
c. Enter display port UUCSSpp to obtain the data module's ID, where
7-10
Issue 5 October 2002
Communication Server (ECS)
board UUCSS.
If not, enter list configuration all.
Port 17 (C-LAN)
Port 33 (VAL)
pp is the port's number.
Product Name
Definity Enterprise
Document Title
Avaya Media Server
and Media Gateway
555-233-115