Avaya DEFINITY Server R Manual page 531

Administer Fiber Links
Form instructions
Page 1 of the form
Fiber Link #: 1
Is one endpoint remoted via a DS1 Converter Complex? ___
ENDPOINT-1
(A-PNC)
Board Location: _____
Board Type: xxx
Fiber Translation:
Type of Transceivers:
Screen A-1. Fiber Link Administration form
Basic Fiber Link Administration.
The following fields appear:
Fiber Link #
3-digit number to uniquely identify a switch connection in the system and its
duplicate if appropriate.
Board Location
physical location of an SNI or EI board that is the first endpoint of the fiber
link.
Board Type
Endpoint-1.
Board Location
physical location of an SNI or EI board that is the second endpoint of the
fiber link.
Board Type
Endpoint-2.
Is one endpoint remoted via a DS1 Converter Complex?
specify that a DS1 Converter complex is used to remote one endpoint. If a
y is entered, A-PNC DS1 Converter circuit pack Location must be
administered on Page 1. A-PNC DS1 Converter circuit pack Type displays.
A-PNC DS1 Converter (DS1CONV) Attributes must be administered on
Page 2 of this form.
Fiber Translation
for faster remote diagnosis.
Converter
555-233-115
FIBER LINK ADMINISTRATION
—
Display-only field. From the command line, enter a 1- to
—
Enter the cabinet, carrier, and slot that identifies the
—
Display-only field showing the type of circuit pack in
—
Enter the cabinet, carrier, and slot that identifies the
—
Display-only field showing the type of circuit pack in
—
Enter multi-mode or single-mode. This field is used
—
Enter y or n. This field is used for faster remote diagnosis.
Page 1 of 1
ENDPOINT-2
(A-PNC)
Board Location: _____
Board Type: xxx
Converter?
Converter Type:
—
Issue 5 October 2002
Enter y to
A-9