Avaya DEFINITY Server R Manual page 441

Downloading Firmware to Port Circuit Packs
1. Type remove file board UUCSS filename and press
image files from the source board.
2. Type list directory board UUCSS and press
The List Directory screen
3. Verify that the new firmware image file is not listed in the
File/Directory Name field.
4. Enter disable filesystem board UUCSS and press
system on the source circuit pack.
Troubleshooting firmware downloads
This section contains three troubleshooting sections:
''Reset 1 or 2''
''Testing firmware download''
''Backing out of firmware download''
Reset 1 or 2
If the system does a reset 1 or 2 and no alarms are present:
1. At the SAT, enter display initcauses and press
2. Clear any errors by performing the procedures in the Error Log Entries and
Test to Clear Values section of the FW-DWNLD maintenance object in the
maintenance book.
Testing firmware download
To test the firmware download process:
1. At the SAT, type test firmware download and press
The Test Results screen
test firmware download
Port Maintenance Name
FW-DWNLD
Screen 7-9. Test Results screen
555-233-115
(Screen
NOTE:
This command is only successful if no files remain on the source
circuit pack.
(Screen
TEST RESULTS
Alt. Name Test No. Result
1413
Enter
.
Enter
7-1) appears.
Enter
.
Enter
Enter
7-9) appears.
PASS
Issue 5 October 2002
to remove
to disable the file
.
SPE A
Error Code
7-25