Avaya DEFINITY Server R Manual page 511

Add IP Solutions
3. At the command prompt, type ping nnn.nnn.nnn.nnn (which is the IP
address of your gateway).
4. At the command prompt, type ping nnn.nnn.nnn.nnn (which is the IP
address of another external computer beyond the gateway).
5. Type exit and press
Test the IP Interface Onboard LAN Connections. To test the onboard LAN
connections, ping the IP Interface server and the processor on the TN802B IP
Interface.
1. Click Start > Programs > Command Prompt.
2. Type ping 192.11.13.9 (which is the IP address of the internal IP Interface
server).
555-233-115
If everything is configured correctly, the system responds with the
following message:
Reply from nnn.nnn.nnn.nnn: bytes=32 time<##ms
TTL=###
If no response, verify the IP address information and check the
connectivity, including the cabling.
I f all else fails, click on Start > Settings > Control Panel >
Network. Select the Adapters tab and highlight the [2] DEC
adapter.
Click Properties > Change.
From the Duplex Mode dropdown menu, select a setting that
matches the switch/hub that the TN802B connects to. For example,
10BaseT Full Duplex or 10BaseT No Link Test
If you have connectivity, the system responds with the following
message:
Reply from nnn.nnn.nnn.nnn: bytes=32 time<##ms
TTL=###
If no response, verify the IP address information and check the
connectivity, including the cabling. Consult your IP network
administrator.
.
Enter
If everything is configured correctly, the system responds with the
following message:
Reply from 192.11.13.9: bytes=32 time<##ms TTL=###
If no response, verify the IP address information and check the
connectivity, including the cabling.
Issue 5 October 2002
7-95