Remove the Present System
Disable Maintenance
1. To prevent scheduled daily maintenance from interfering with the update or
upgrade, type change system-parameters maintenance and press
2. If scheduled maintenance has begun, set the Stop Time field to 1 minute
after the current time.
or
If scheduled maintenance has not begun, set the Start Time field to a
time after the upgrade is completed. For example, if you start the upgrade
at 8:00 p.m. and the upgrade takes 90 minutes, set the Start Time field
to 21:30.
!
3. Type neither in the Alarm Origination to OSS Numbers field and
press
Check Link Status
1. Type display communication-interface links and press
all enabled links.
2. Type status link number and press
3. Write down which links are in service.
Disable TTI
NOTE:
Do this step only if the Terminal Translation Initialization (TTI) is enabled.
!
CAUTION:
If you do not disable the TTI, the translations can be corrupted.
1. Type change system-parameters features and press
2. On the second screen, set the Terminal Translation
Initialization (TTI) Enabled? field to n to de-activate the TTI
feature. If it is already set to n, cancel the command and skip step 3.
555-233-115
CAUTION:
If you do not disable Alarm Origination, the system may generate
alarms, resulting in unnecessary trouble tickets.
Enter.
NOTE:
For some software loads, set the Alarm Origination
Activated field to n and set the Cleared Alarm Notification
and Restart Notification fields to disable or n before pressing
.
Enter
Enter
. Repeat this step for all links.
Enter
Enter.
Issue 5 October 2002
.
Enter
. Write down
3-11