Avaya DEFINITY Server R Manual page 211

Standard Reliability
Table 5-8. Required Hardware
Equipment
PEC
6300-05X
J58890AF-1
108187170
103557294
or
108469446
407439975
106455348
or
106455363
1.
Depending on the number of EPNs. Two are required for a standard reliability system
with 2 port networks; 6 with 3 port networks. Either 1 or 4 Expansion Interfaces (EIs)
are shipped loose with the EPN equipment. The factory has installed either 1 or 2 EIs
in the new PPN.
2. Required port network interfaces with the optional packet bus.
3. Depending on the number of EPNs. Two or 6 are required if the PPN and EPN(s) are
remotely located. Assuming acceptable lengths, the fiber that previously connected
an upgraded G2 universal module (not a traditional module) to the G2 TMS has the
correct transceiver connectors and can be reused.
4. One pair for each fiber connection. For each connection, either 1 lightwave
transceiver is installed in an EPN and 1 in the PPN. A transceiver can be reused from
each upgraded G2 universal module. Additional transceivers, ordered separately, are
also shipped loose with the EPN equipment.
Required Tools
The following tools and items may be required during the upgrade:
High-intensity flashlight or AC drop light
3/8-inch flat-blade screwdriver with a 10-inch shank (minimum)
5/16-inch and 1/4-inch sockets with a ratchet and 10-inch extension
Long-nose pliers to disconnect ground straps and straighten backplane
pins
Static-proof or original circuit pack packaging for transporting circuit packs
Labels for identifying the port circuit packs and cables attached to the rear
of cabinets
Twelve spare #12 and #10 self-tapping screws
555-233-115
Description
Processor Port Network
Expansion Control Carrier
TN775C Maintenance
TN776 Expansion Interface
TN570 Expansion Interface
20-ft. Multimode Fiber Optic Cable
9823A Lightwave Transceiver (short)
9823B Lightwave Transceiver (long)
Quantity
1
1
1
2 or 6
2 or 6
1 or 3
2 or 6
2 or 6
Issue 5 October 2002
1
1,2
3
4
5
5-19