Adding Or Removing Cabinet Hardware; Add Circuit Packs - Avaya DEFINITY Server R Manual

Upgrades and additions

Hide thumbs Also See for DEFINITY Server R:

Table of Contents

Adding or Removing Cabinet

This chapter contains information to add or remove cabinet hardware. To install

adjunct or peripheral equipment, refer to Installation for Adjuncts and Peripherals

for Avaya MultiVantage Software.

To add fiber optic cables to an existing system, refer to the Multicarrier Cabinets

installation instructions in the Made Easy Tool for DEFINITY Media Server

Configurations.

When installing additional features or equipment, it may be necessary to install

additional circuit packs. This is a general procedure to use when adding features

or equipment that require adding circuit packs.

1. Log onto the system and answer y to the Suppress Alarm Origination

question during login.

2. Install the circuit pack into the carrier.

3. Log off the system after the addition (and any required administration) is

For information about administering circuit packs and other equipment, refer to

Administrator's Guide for Avaya MultiVantage Software.

Issue 5 October 2002

Chapters

Table of Contents