Avaya DEFINITY Server R Manual page 477

Add IP Solutions
NOTE:
To properly seat the circuit pack, push firmly on the front of the faceplate
until the latch reaches the bottom rail of the carrier. Then close the latch until
it is fully engaged.
1. Insert the TN799B/C circuit pack into the port slot identified earlier.
2. Insert the TN2302AP IP Media Processor into the port slot you reserved for
it and seat it properly (See
When you plug in the TN2302AP IP Media Processor, the circuit pack
starts to boot. The RED LED stays on until an IP address is assigned to the
circuit pack.
3. Type list configuration all and press
recognizes the TN2302AP circuit packs.
555-233-115
Figure 7-8).
to verify that the system
Enter
Issue 5 October 2002
7-61