Add Tie Trunks - Avaya DEFINITY Server R Manual

Adding or Removing Cabinet Hardware

Add Tie Trunks

Requirements
Each tie trunk connects to 1 port of a 4-port tie trunk circuit pack or to an
assortment of international tie trunk circuit packs.
Installation
1. Determine the port assignment of the trunk from the trunk group screen.
EXAMPLE:
2. Install the tie trunk or an international tie trunk circuit pack in assigned
carrier slot (if an additional circuit pack is required).
3. For customer-owned (not leased) tie-trunk facilities (such as campus
environments), tie trunk circuit packs provide signaling capabilities beyond
those specified by the industry-wide E&M standard. Use
Table 7-6
circuit pack, and administer the port.
4. Administer forms listed under "Tie Trunk Group" in the Administrator's
Guide for Avaya MultiVantage Software.
UNPROT
4 3 2 1
PROT
Figure 7-1. Tie Trunk Circuit Packs (Component Side)
7-32
Issue 5 October 2002
3 A
Cabinet (Port Carrier
Network)
to choose the preferred signaling format, set switches on the
SMPLX SMPLX
PORT 4
E & M E & M
07
Slot
Number
SMPLX
PORT 2
PORT 3
E & M
01
Port
Number
Figure 7-1 and
SMPLX
PORT 1
E & M
r758183 RBP 050896
555-233-115