Avaya DEFINITY Server R Manual page 335

Add a Control Carrier (Add Duplication)
Save Translations
1. Log in at the management terminal.
2. Type save translation [spe-a] disk and press
instructs the system write all translation information from memory to disk.
3. If the PPN or an EPN (where PPN Port Carrier B will be relocated) contains
a TN75/B Announcement circuit pack, type display announcements and
press
4. If administered recorded announcements are listed, type list
configuration software-version and press
when the announcements were last saved. Save the current
announcements by typing save announcements disk and pressing
5. Type backup disk [spe-a] and press
backup the current information on disk to the system tape.
6. Update backup tape, if required.
Label Cables
1. To make reconnecting the cables simpler and more reliable, label both
ends of the connector cables associated with the port carrier "B" to be
removed.
Shut Down DEFINITY LAN Gateway System
If a DEFINITY LAN Gateway system resides in the control cabinet to be
upgraded, prepare to shut down the DEFINITY LAN Gateway assembly and allow
the disk to completely spin down.
!
CAUTION:
Before using this procedure to shut down the DEFINITY LAN Gateway,
make sure that you save the system parameters if you plan to reuse the
current system.
!
WARNING:
Neglecting to shut down a DEFINITY LAN Gateway assembly before
powering down the system cabinet where it resides can damage the LAN
Gateway disk.
1. Log onto the DEFINITY LAN Gateway. See DEFINITY Communications
System Generic 3 Installation, Administration and Maintenance of CallVisor
ASAI over the DEFINITY LAN Gateway for the procedure to log in.
2. When the main menu appears, select Maintenance.
3. Select Reset System from the Maintenance menu.
4. Select Shutdown from the Reset System menu.
5. Unseat the LAN Gateway assembly from its backplane connectors.
555-233-115
.
Enter
. This command
Enter
. Check screen 2 to see
Enter
. This instructs the system to
Enter
Issue 5 October 2002
.
Enter
6-15