Add Co, Fx, Wats, And Pcol; Add Did Trunks - Avaya DEFINITY Server R Manual

Add CO, FX, WATS, and PCOL

Add CO, FX, WATS, and PCOL
Requirements
Each Central Office (CO), Foreign Exchange (FX), Personal Central Office Line
(PCOL), or Wide Area Telecommunications Service (WATS) trunk connects to 1
port of either an 8-port TN747B or to 1 of several CO trunk circuit packs.
Installation
1. Install a TN747B or a CO Trunk circuit pack in the assigned carrier slot (if
an additional circuit pack is required).
2. Administer the forms listed under CO, FX, WATS, or PCOL Trunk Group in
Administrator's Guide for Avaya MultiVantage Software.
3. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:

Add DID Trunks

Requirements
Each Direct Inward Dial (DID) trunk connects to 1 port DID Trunk circuit pack or to
1 port of an assortment of DID trunk circuit packs.
Installation
1. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
2. Install a DID Trunk circuit pack in assigned carrier slot (if an additional
circuit pack is required).
3. Administer forms listed under "DID Trunk Group" in Administrator's Guide
for Avaya MultiVantage Software.
555-233-115
3 A
Cabinet (Port Carrier
Network)
3 A
Cabinet (Port Carrier
Network)
07 01
Slot Port
Number Number
07 01
Slot Port
Number Number
Issue 5 October 2002
7-31