Re-Enable Tti; Release Mmi (High/Critical Reliability Only); Check For Translation Corruption; Verify The Upgrade - Avaya DEFINITY Server R Manual

Upgrading Release 9/10r to Avaya DEFINITY Server R
running Avaya MultiVantage Software

Re-enable TTI

NOTE:
Do this step only if you disabled TTI before the upgrade.
1. Type change system-parameters features and press
2. On the second screen, set the Terminal Translation
Initialization Enable field to y to re-enable the TTI feature.
3. Type status tti and press
4. Repeat the status command until the TTI Background Task State
reads completed.

Release MMI (High/Critical reliability only)

1. Type release board UUCSS and press
that you busied-out in the

Check for Translation Corruption

1. Type newterm and press
2. If you do not get a login prompt and see the following message:
follow the normal escalation procedure for translation corruption before
continuing the upgrade.

Verify the Upgrade

1. Type status system 1 and verify that the system is in a normal state.
Check these fields for the corresponding values:
2. Type display alarms and press
If there are alarms, take the necessary corrective actions.
3. Type list configuration software-version and press
In the SOFTWARE VERSION section verify that the Memory Resident
field matches the new software version.
4. Type display communication-links and press
Ensure that the link administration is the same as before the upgrade.
1-26
Issue 5 October 2002
Enter
Busyout MMI Circuit Packs
RETURN
Warning: Translation corruption detected
Maj/Min alarms = 0
Service State = in service
.
to release the circuit packs
RETURN
.
.
RETURN
RETURN
.
Enter
section.
.
RETURN
.
555-233-115