Avaya DEFINITY Server R Manual page 532

Fiber Link Administration
Type of Transceivers
diagnosis.
Converter Type
on the Fiber Link Administration screen is set to y.
Duplicated Fiber Link Administration.
add fiber-link next
Fiber Link #: 1
Is one endpoint remoted via DS1 Converter Complex? yes
ENDPOINT-1
(A-PNC)
Board Location: 01E01
Board Type: ei
DS1CONV Board Location: 01B01
DS1CONV Board Type: TN574
ENDPOINT-1
(B-PNC)
Board Location: 01D01
Board Type: ei
DS1CONV Board Location: 01C01
DS1CONV Board Type: TN574
Screen A-2. Fiber Link Administration form (page 1 of 3)
The following fields appear when Administration of PNC Duplication is
enabled on the System-Parameters Customer-Options form:
Fiber Link #
3-digit number to uniquely identify a switch connection in the system and its
duplicate if appropriate.
Is one endpoint remoted via DS1 Converter Complex?
specify that a DS1 converter complex is used to remote one endpoint. If
yes is entered, A-PNC and B-PNC DS1 Converter (DS1CONV) Attributes
must be administered on Pages 2 and 3 (respectively) of the form.
Board Location
physical location of a circuit pack in the first endpoint of the duplicate fiber
link. Endpoint-1's duplicate along with Endpoint-2's duplicate make up the
duplicate fiber link called the B-PNC link.
Board Type
Endpoint-1. The circuit pack type in Endpoint-1 (A-PNC) and Endpoint-1
(B-PNC) must be the same.
A-10
Issue 5 October 2002
—
Enter A or B. This field is used for faster remote
—
Enter Avaya or other. Appears when the converter field
FIBER LINK ADMINISTRATION
ENDPOINT-2
(A-PNC)
Board Location: 02A01
Board Type: ei
DS1CONV Board Location: 02B01
DS1CONV Board Type: TN574
ENDPOINT-2
(B-PNC)
Board Location: 02A02
Board Type: ei
DS1CONV Board Location: 02C01
DS1CONV Board Type: TN574
—
Display-only field. From the command line, enter a 1- to
—
Enter the cabinet, carrier, and slot that identifies the
—
Display-only field showing the type of circuit pack in
Page 1 of 3
—
Enter yes to
555-233-115