Avaya DEFINITY Server R Manual page 374

Adding New Carriers and EPN Cabinets
Disable TTI
NOTE:
Do this step only if the Terminal Translation Initialization (TTI) is enabled.
!
CAUTION:
If you do not disable the TTI, the translations can be corrupted.
1. Type change system-parameters features and press
2. On the second screen, set the TTI Enabled? field to n to de-activate the
TTI feature. If it is already set to n, cancel the command.
3. Type status tti and press
shows 100%.
Save Translations
If standard reliability:
1. Type save translation disk and press
information in memory and write it to the disk.
If high or critical reliability:
1. Type save translation [spe-a or both] disk and press
Save Announcements
NOTE:
The TN750C and TN2501 AP Integrated Announcement circuit packs store
announcements in nonvolatile memory; saving the announcements is
optional.
Only one announcement board can be saved per tape/optical disk cartridge.
1. If the PPN contains a TN750B Announcement circuit pack, type display
announcements and press
2. If administered recorded announcements are listed, type save
announcements UUCSS and press
about 30 minutes.
6-54
Issue 5 October 2002
Enter
NOTE:
For some software loads, type save announcements from UUCSS.
Type help and press
Enter
. Wait until the Percent Complete field
to take all translation
Enter
.
Enter
. For example, 01D03. This takes
Enter
for complete command usage.
Enter.
.
Enter
555-233-115