Avaya DEFINITY Server R Manual page 516

Adding or Removing Cabinet Hardware
11. Affix the new TN802B label to the circuit pack.
12. Disconnect the monitor, keyboard, and mouse.
Circuit Pack Verification
1. Type change circuit-pack and press
2. Check the Code column to see if it says DSMAPD or MedPro.
.
change circuit-packs
Cabinet: 1
Slot Code
01: TN754
02: TN758
03: TN2144
04: TN746
05
06: TN771
07: TN464
08: TN2140
09: TN767
10: TN799
'#' indicates circuit pack conflict.
3. To correct it, go to the entry just above the TN802B that says DSMAPD.
4. Type MEDPRO, and press
changes the entry above it. If it is in IP Trunk mode, you get the following
error message:
MedPro type requires TN802 with application. Type
MEDPRO on circuit-packs form.
5. To complete the administration, refer to the Administration for Network
Connectivity for Avaya MultiVantage Software book.
7-100
Issue 5 October 2002
CIRCUIT PACKS
Sf Mode Name
DIGITAL LINE
POOLED MODEM
ANALOG LINE
B ANALOG LINE
C MAINTENANCE/TEST
F DS1 INTERFACE
E&M TIE TRUNK
E DS1 INTERFACE
B CONTROL-LAN
Enter
.
Enter
Carrier: A
Carrier Type: processor
Slot Code Sf Mode
11: MEDPRO
12: MEDPRO
13: TN802 B
14:
15:
16:
. Changing the one entry automatically
Page 1 of 5
Name
RESERVED-IP
RESERVED-IP
MAPD BOARD
555-233-115