Add Ttc Japanese 2-Mbit Trunks; Add Dcs Interface - Avaya DEFINITY Server R Manual

Add TTC Japanese 2-Mbit Trunks

Add TTC Japanese 2-Mbit Trunks
The TN2242 Japan 2-Mbit trunk interconnects the Avaya Media Gateway to other
vendor equipment in Japan as well as to other switches through the Time Division
Multiplexor (TDM).
Installing the trunk
1. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
2. Install a TN2242 circuit pack in assigned carrier slot.
3. Connect the H600-513 cable from the cabinet to the Time Division
Multiplexor device.
4. To administer forms, see the following sections in the Administrator's Guide
for Avaya MultiVantage Software.

Add DCS Interface

Systems in a Distributed Communications System (DCS) network are
interconnected by both tie trunks (for voice communications) and data links (for
control and transparent feature information). These data links, also called DCS
signaling links, support the feature transparency.
DCS requires a special signaling connection to carry the information needed to
make the DCS features work. This signaling connection, or link, between two
switches in a DCS network is implemented either:
over a PGATE channel using the X.25 protocol.
over an ISDN-PRI D-channel.
over a TCP/IP (either PPP or 10Base-T Ethernet) connection.
555-233-115
3 A
Cabinet (Port Carrier
Network)
For ISDN applications, see ISDN Service.
For non-ISDN applications, see Managing Trunks.
07 01
Slot Port
Number Number
Issue 5 October 2002
7-51