Avaya DEFINITY Server R Manual page 425

Downloading Firmware to Port Circuit Packs
Verify hardware/software requirements
The following items and procedures are needed to download firmware to the
appropriate circuit packs:
Use an appropriate procedure and source circuit pack to download
firmware to the following target circuit packs
Table 7-4. Download Procedure by Circuit Pack
Source
Circuit Pack
TN799C (C-LAN)
TN799DP (C-LAN)
TN2501AP (VAL)
A source circuit pack with an Ethernet data module administered to one of
its ports
Target port circuit packs with a "P" suffix
Services login and password
Clear channel between the source (C-LAN) and target board (for
downloads to remote PNs only)
PC or other server
IP connectivity to the source board
IP connectivity to the World-Wide Web
File transfer protocol (FTP) software program
Web browser (Netscape 4.5 or Internet Explorer 5, or higher)
555-233-115
Download Method
''Remote
download''
''Self-Download''
or
''Remote
download''
''Self-Download''
NOTE:
Some GUI-based FTP applications are incompatible with Avaya
MultiVantage Software. Command-line FTP applications launched
from a UNIX shell or DOS prompt work best.
(Table 7-4).
Target Circuit Pack(s)
DIG-LINE, UDS1, IPMEDPRO, or
Maintenance/Test
The TN799DP or TN2312AP itself
DIG-LINE, UDS1, IPMEDPRO, or
Maintenance/Test
The TN2501AP itself
Continued on next page
Issue 5 October 2002
7-9