Record All Busyouts; Check Link Status; Check Clock Synchronization; Check For Translation Corruption - Avaya DEFINITY Server R Manual

Task Table

Record all Busyouts

1. Type display errors and press
any trunks that are busied out, so you can return them to their busy-out
state after the upgrade.

Check Link Status

1. Type display communication-interface links and press
Write down all enabled links.
2. Type
Check the following fields for the values listed:
3. If any of the links are not up, take the necessary corrective action to restore
the link before continuing with the upgrade.

Check Clock Synchronization

1. Type status sync and press
synchronization is good. If not, contact the network to resolve.

Check for Translation Corruption

1. Type newterm and press
2. If you do not get a login prompt, but instead see the following message
then follow the normal escalation procedure for translation corruption
before continuing the upgrade.
555-233-115
number and press
status link
Link Status = connected
Service State = in service
NOTE:
For Release 7 and later, the only way to determine if an ISDN-PRI
D-Channel is up is to
1. Type list signaling group and press
Note the signaling groups listed by number.
2. For each of the signaling groups listed, type status signaling
group <number> and press
RETURN
Warning: Translation corruption detected
. Look for type 18 errors and record
ENTER
for each administered link.
RETURN
.
RETURN
to verify that the clock
RETURN
.
Issue 5 October 2002
.
RETURN
.
RETURN
1-17