Avaya DEFINITY Server R Manual page 539

Administer Fiber Links
Duplicated DS1 Converter Complex Administration for T1 TN1654 Circuit
Packs.
add fiber-link next
A-PNC DS1 CONVERTER (DS1CONV) ATTRIBUTES
DS1CONV Board Location: 01B01
DS1CONV Board Type: TN1654
Facility Installed?
Facility Startup Idle Code:
Line Coding:
Line Termination:
Facility A Circuit ID: 09876543
Facility B Circuit ID: 234567889
Facility C Circuit ID: 434566335
Screen A-6. Fiber Link Administration form for E1 TN1654 Circuit Pack (DS1 Converter
Complex Administration) (page 2 of 3)
The following unique fields display when administering a TN1654 DS1 Converter.
Bit Rate
See previous section. 1.544 indicates domestic T1 operation and 2.048
indicates international E1 operation.
DS1 Converter Complex Administration for E1 TN1654 Circuit Packs .
The following unique fields display when administering a E1 TN1654 DS1
Converter.
Bit Rate
Enter either 1.544 for domestic T1 operation or 2.048 for international E1
operation.
Idle Code MSB(1) ... LSB(8)
pack is TN1654. Enter 8 digits, each digit must be 0 or 1. The second digit
must be 1. Default is 11101000. You can administer this field on a per
circuit pack basis.
555-233-115
FIBER LINK ADMINISTRATION
DS1 CONVERTER FACILITIES
A B
yes yes
Bit Rate: 2.048
11101000
hdb3 hdb3
CRC? yes
—
A display-only field for TN1654 entered on page 3 of the form.
—
Displays when the DS1 Converter circuit pack is TN1654.
NOTE:
Since one bit rate applies for all facilities within the same DS1
Converter complex, Bit Rate displays only under Facility A. To
activate the desired Bit Rate, the toggle switch on the circuit pack
must be set and it must correspond to the Bit Rate.
DS1CONV Board Location: 02B01
DS1CONV Board Type: TN1654
C D
yes no
hdb3 hdb3
—
Displays when the DS1 Converter circuit
Issue 5 October 2002
Page 2 of 3
A-17