Avaya DEFINITY Server R Manual page 363

Add the Fiber Optic Cable
10. Wrap the cable disconnect label around the fiber optic cable. See
Figure
Figure Notes
1. To outside plant fiber
Figure 6-21. Cable Disconnect Label
11. Close the rear door.
!
!
555-233-115
6-21.
prda0001 RPY 021898
CAUTION:
Avoid bending fiber optic cables to a radius smaller than 1.5 inches
(3.8 cm), to prevent mechanical stress on the cables. Plan the use of
cable ties to avoid crimping the cable or creating a fixed stress point
where, at a later time, movement of the cable causes it to exceed the
minimum bend radius.
CAUTION:
Be careful not to crimp the fiber cable when you are performing the
following step.
1
Issue 5 October 2002
6-43