Avaya DEFINITY Server R Manual page 504

Adding or Removing Cabinet Hardware
3. Check the Code column to see if the slots above the TN802B say
DSMAPD or MEDPRO.
.
change circuit-packs
Cabinet: 1
Slot Code
01: TN754
02: TN758
03: TN2144
04: TN746
05
06: TN771
07: TN464
08: TN2140
09: TN767
10: TN799
'#' indicates circuit pack conflict.
4. If MEDPRO, go to the entry just above the TN802B that says MEDPRO.
5. Type DSMAPD, and press
changes the entry above it. If it is in IP Trunk mode, you get the following
error message:
MedPro type requires TN802 with application. Type
MEDPRO on circuit-packs form.
Log onto the TN802B Interface Server . If administered remotely through
pcANYWHERE:
1. Dial in to the server through pcANYWHERE using the dialup number
supplied.
2. Click on the pcANYWHERE Remote Host Computer button on the toolbar
to send
3. Type administrator in the User Name field.
4. Type iptrunk in the Password field and click OK.
5. After logging on for the first time, change the administrator password and, if
desired, the user name, to ensure security. See your Windows NT server
documentation for details.
If administered locally on a monitor, keyboard, and mouse:
1. Press
2. Type administrator in the User Name field.
3. Type iptrunk in the Password field and click OK.
7-88
Issue 5 October 2002
CIRCUIT PACKS
Sf Mode Name
DIGITAL LINE
POOLED MODEM
ANALOG LINE
B ANALOG LINE
C MAINTENANCE/TEST
F DS1 INTERFACE
E&M TIE TRUNK
E DS1 INTERFACE
B CONTROL-LAN
Enter
to the host.
CTRL ALT DEL
, , and simultaneously.
CTRL ALT DEL
Carrier: A
Carrier Type: processor
Slot Code Sf Mode
11: DSMAPD
12: DSMAPD
13: TN802 B
14:
15:
16:
. Changing the one entry automatically
Page 1 of 5
Name
RESERVED-IP
RESERVED-IP
MAPD BOARD
555-233-115