Avaya DEFINITY Server R Manual page 361

Add the Fiber Optic Cable
3. Attach the supplied fiber optic cable to the adapter.
4. Pull the tool (with adapter and cable attached) out through the front of the
cabinet. See
Figure 6-19. Fiber Optic Cable and Adapter
5. From the rear, route the fiber optic cable through the opening vacated by
the I/O cable connector.
6. If necessary, remove the fiber adapter from the tool and plug the fiber optic
cable into the SC-SC (single-mode) or ST-SC (multimode) adapter. See
Figure
7. From the front of the I/O connector adapter bracket (with fiber cable), snap
the coupling into the supplied I/O connector adapter bracket.
8. Snap the I/O connector adapter bracket into the I/O connector opening.
9. Attach the outside fiber plant to the I/O connector on the rear of the
cabinet.
555-233-115
Figure 6-19.
6-20. Check the house cabling before selecting a coupling to use.
lcda6fop RPY 021698
Issue 5 October 2002
6-41