Cleaning Web Length Detection - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > Fixing > Controls > Cleaning web length detection
●
Related Error Code
Error in connection of the Fixing Web Solenoid
005-0001
●
Related Service Mode
To switch the number of times to turn ON the Fixing Web Drive Solenoid
COPIER > OPTION > BODY > CBLTINVL
0: Normal [default]
1: 1.5 times of the normal mode
2: 0.5 times of the normal mode
3: 0.75 times of the normal mode
2
Technology > Fixing > Controls > Cleaning web length detection
■

Cleaning web length detection

When the length of the Cleaning Web is reduced, the Web Level Detection Arm is moved in
the direction of the arrow to block the light path of the Fixing Cleaning Web Level Detection
Sensor (PS45). When the Fixing Web Drive Solenoid has been turned ON for 4 times after
the detection by this sensor, a fixing web length warning message is displayed on the Control
Panel.
Fixing Cleaning Web takeup roller
After the display of the fixing web length warning message, the number of turning ON the
Fixing Cleaning Web Drive Solenoid is to be counted.
The Error Code "E005-0000" is displayed once the counter value reaches 2000 (3000 sheets
of copy/print in A4 size)
In the case of replacing the Fixing Cleaning Web, be sure to clear the Fixing Web
Counter by the following Service Mode
Fixing Cleaning Web take-up counter after the level warning
COPIER >COUNTER >MISC >FIX-WEB
Fixing Cleaning Web take-up counter
COPIER >COUNTER >DRBL-1>FX-WEB
●
Related Error Code
Error in absence of the Fixing Web
E005-0000:After the advance notice detection for the absence of the Fixing Web, the
web has continued to be pulled for 2000 times.
2-117
Web length detecting arm
Fixing Cleaning Web Level Sensor(PS45)
F-2-151 F-2-151
2-117