Rep 2.11.2 Tray 5 Feed Roll - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.11.2 Tray 5 Feed Roll

Parts List on PL 2.11
Removal
NOTE: After replacing the Feed Roll, clear the HFSI counter. DC135(008-810) Diag. Screen
NOTE: Replace the Tray 5 Feed, Nudger and Retard Rolls at the same time.
Turn power off and disconnect the power plug.
1. Open the Upper Tray 5 Assembly (Figure
1. Pull the lever up and open the Upper Tray 5 Assembly.
Figure 1 Opening the Upper Tray 5 Assembly
2. Remove the Tray 5 Feed Roll (Figure
1. Remove the chute.
2. Remove the collar.
3. Remove the Feed Roll.
Reissue
DocuColor 12/DCCS50
WARNING
1).
2).
Figure 2 Removing the Tray 5 Feed Roll
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-29
Repairs and Adjustments
REP 2.11.2