Chrysler Conquest 1988 Service Manual page 738

-____
-Ie__-_-.-
ENGINE - Rocker Arm and Shaft Assemblv
ROCKER ARM AND SHAFT ASSEMBLY
NOSNE- -
DISASSEMBLY AND REASSEMBLY
16
S-i0 Nm
5.8-7.2 ftlbs.
Disassembly steps
1. Rear bearing cap
2. Rocker arm "C"
3. Rocker arm "A"
4. Rocker shaft spring
++ 5. Bearing cap No. 4
6. Rocker arm "C"
7. Rocker arm "A"
8. Rocker shaft spring
I)+ 9. Bearing cap No. 3
10. Rocker arm "C"
11, Rocker arm "A"
Y
12. Rocker shaft spring
I)+ 13. Bearing cap No. 2
14. Rocker arm "C"
15. Rocker arm "A"
l + 16. Wave washer
I)+ 17, Right rocker arm shaft
+* 18. Left rocker arm shaft
++ 19. Front bearing cap
NOTE
20. Nut
b
(I 1
21, Adjusting screw
Reverse the disassembly procedures to reassemble
(2) l +: Refer to "Service Points of Reassembly".