Chrysler Conquest 1988 Service Manual page 961

AIR CONDITIONING
- Service Adjustment Procedures
24-85
(8) Charge through the suction side of the system .by slowly
opening the suction manifold valve, Adjust the valve as
necessary so charging pressure does not exceed 345 kPa
(50 psi). Maintain the tempe~rature of the water in the pan
by adding warm water as 'necessary.
Note the weight of water added, to ensure accuracy when
determining amount of refrigerant added to system.
(9) Adjust the engine speed to a fast idle of approximately
1,500 rpm.
(10)When specified refrigerant charge 910 g (32 oz.) has
entered the system, close the gauge set manifold valves,
refrigerant manifold valves, and reconnect wiring.
Each can contains 14 oz. of R-12. Use 2% cans.
HANDLING TUBING AND FITTINGS
N24FIAC
2-15 Nm
-11 ft.lbs.
12-15 Nm
9-I 1 ft.lbs.
\
30-34 Nm
22-26 ftlbs.
30-34 Nm
22-26 ft.lbs.
20-25 Nm
15-18ft.lbs.
2OY1654