Chrysler Conquest 1988 Service Manual page 881

HEATERS
- Troubleshootinn
24-5
OPERATION
N24EAAH
l
When the ignition switch is at "ON", current
flows through fuse No. 12, blower relay (coil),
and ground, causing the blower relay contacts to
close.
TROUBLESHOOTING HINTS
Blower motor turns only at high speed.
l
Check resistor.
l
Then, when the blower switch is set at any of
" LO " , "ME" or "HI", current flows through fuse
No. 5, blower relay (contacts), blower switch,
resistor, blower motor and ground, causing the
blower motor to rotate.