Chrysler Crossfire 2007 Owner's Manual
  1. Manuals
  2. Brands
  3. Chrysler Manuals
  4. Automobile
  5. Crossfire 2007
  6. Owner's manual

Chrysler Crossfire 2007 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4
UNDERSTANDING YOUR INSTRUMENT PANEL
5
STARTING AND OPERATING
6
WHAT TO DO IN EMERGENCIES
7
MAINTAINING YOUR VEHICLE
8
MAINTENANCE SCHEDULES
9
IF YOU NEED CONSUMER ASSISTANCE
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
INDEX
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
I n f o r ma t i o n P r o v i d e d b y :
. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading

Related Manuals for Chrysler Crossfire 2007

Summary of Contents for Chrysler Crossfire 2007

  • Page 1: Introduction

    TABLE OF CONTENTS SECTION PAGE ............. 3 INTRODUCTION .
  • Page 2 I n f o r ma t i o n P r o v i d e d b y :...

  • Page 3: Table Of Contents

    INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....6 How To Use This Manual .

  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION WARNING! This manual has been prepared with the assistance of service and engineering specialists to acquaint you with Engine exhaust, some of its constituents, and certain the operation and maintenance of your Crossfire. It is vehicle components contain or emit chemicals supplemented by a Warranty Information Booklet and known to the State of California to cause cancer and various customer-oriented documents.
  • Page 5 INTRODUCTION 5 I n f o r ma t i o n P r o v i d e d b y :...

  • Page 6: Warnings And Cautions

    6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures which could result in an accident or bodily injury. It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entire manual you may miss important information.

  • Page 7: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Start Lockout ......14 A Word About Your Keys ....9 ▫...
  • Page 8 8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Child Restraint ......47 Power Windows ......21 ▫...

  • Page 9: A Word About Your Keys

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9 A WORD ABOUT YOUR KEYS To release the key from the folded position, press the You can insert the double-sided keys into the locks with button. The key unfolds from the fob. either side up.

  • Page 10: Ignition Key Removal

    10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Important! Removing the key from the steering lock activates the start lock-out. The engine cannot be started. Turning the key in the steering lock to the ON/RUN position deactivates the start lock-out. NOTE: In case the engine cannot be started, and START and ERROR are shown in the odometer display field, the system is not operational.

  • Page 11: Glove Compartment Lock

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 GLOVE COMPARTMENT LOCK DOOR LOCKS The vehicle doors can be locked when the doors are closed by either manually pressing the button down at the top of the door panel, pressing and releasing the bottom portion of the central locking switch located in the console, or by pressing and releasing the Lock transmit button on the key fob.

  • Page 12: Central Locking Switch

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The doors can be unlocked by pulling on the inside door NOTE: In case of a malfunction in the central locking handle, pressing and releasing the top portion of the system, the doors can be locked and unlocked individu- central locking switch located in the console, or by ally.

  • Page 13: Automatic Central Locking

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 was previously locked with the central locking switch, NOTE: If the doors are unlocked with the central the complete vehicle is unlocked when a door is opened locking switch after activating the automatic central from the inside.

  • Page 14: Emergency Unlocking Feature

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To help prevent the vehicle battery from dis- Start Lockout charging during short periods of inactivity, perform the Removing the key from the ignition switch activates the following: start lockout. The engine cannot be started. Turning the key to the ON/RUN position deactivates the start lock- 1.

  • Page 15: To Unlock The Doors

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 To Unlock the Doors Press and release the unlock button on the key fob. NOTE: If within 40 seconds of unlocking with the key fob, neither door is opened, the key is not inserted in the ignition switch, or the central locking switch is not activated, the vehicle will automatically lock.

  • Page 16: To Lock The Doors

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Doors Press the Lock button on the key fob once. All turn signal lights blink three times to indicate that the vehicle is locked. If the turn signal lights do not blink, a door or rear liftgate/decklid is not closed properly.

  • Page 17: Panic Alarm

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Panic Alarm General Information The panic alarm unlocks the driver’s door, turns on the This transmitter complies with FCC rules part 15. Opera- interior lights, flashes the foglights and sounds the horn tion is subject to the following conditions: for about three minutes or until the alarm is turned off.

  • Page 18: Transmitter Battery Service

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Service The recommended replacement Lithium battery is Pana- sonic CR 2025 or equivalent. To change the batteries: • Insert the new batteries in the direction of the arrow with the positive symbol facing upwards. •...

  • Page 19: Security Alarm System

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 approximately 30 seconds, insert the key in the ignition Tow-Away Alarm and turn it to the ON/RUN position. The remote control The tow-away alarm switch is located on the console. To should once again be operational. deactivate for towing or jacking up the vehicle, press and release the upper portion of the switch.

  • Page 20: Decklid Internal Emergency Release - Roadster

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The tow-away alarm remains switched off until the DECKLID INTERNAL EMERGENCY RELEASE - vehicle is locked again with the key or the remote control, ROADSTER at which time it is automatically reactivated. As a security measure, a Decklid Internal Emergency Release lever is built into the decklid latching mecha- nism.

  • Page 21: Power Windows

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 WARNING! If the battery voltage drops below the minimum threshold at any time, the Trunk Internal Emergency Release will not function. WARNING! The Trunk Internal Emergency Release will not func- tion during the convertible top operation. POWER WINDOWS The power window switches are located in the console.

  • Page 22: Power Window Operation With The Convertible Top Switch (Roadster Only)

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For express opening of windows, press the switch past WARNING! the resistance point and release; the window lowers to the fully open position. To interrupt the procedure, When leaving the vehicle, always remove the key briefly press the switch again and release.

  • Page 23: Rear Liftgate/Decklid Release

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 REAR LIFTGATE/DECKLID RELEASE OCCUPANT RESTRAINTS You can open the rear liftgate/decklid by using the Some of the most important safety features in your handle located on the liftgate/decklid just above the rear vehicle are the restraint systems.

  • Page 24: Lap/Shoulder Belts

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even conditions. In a collision, the belt locks and reduces the on short trips. Someone on the road may be a poor driver risk of your striking the inside of the vehicle or being and cause a collision that includes you.
  • Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Lap/Shoulder Belt Operating Instructions WARNING! 1. Enter the vehicle and close the door. Unless the key is • Wearing a seat belt incorrectly is dangerous. Seat in the ACC or ON position, seat will not move. Sit back belts are designed to go around the large bones of and adjust the seat.
  • Page 26 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of your seat. 3. When the belt is long enough to fit, insert the latch Grasp the latch plate and pull out the belt. Slide the latch plate into the buckle until you hear a “click.”...
  • Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 5. To loosen the lap belt if it is too tight, tilt the latch plate WARNING! away from you and pull on the lap belt. Remember that a snug belt reduces the risk of sliding under the belt in a •...
  • Page 28 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! • A lap belt worn too high can increase the risk of Seat belt systems must always be replaced after an internal injury in a collision. The belt forces won’t impact severe enough to fire the emergency locking be at the strong hip and pelvic bones, but across retractors.

  • Page 29: Seat Belts And Pregnant Women

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 Seat Belts and Pregnant Women WARNING! We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is Using a seat belt extender when not needed can the best way to keep the baby safe.

  • Page 30: Supplemental Restraint System (Srs) - Airbag

    30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for the driver and passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the steering wheel. The passenger frontal airbag is mounted in the instrument panel, under a cover marked SRS/AIRBAG.
  • Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 is empty or is occupied by someone that is classified in WARNING! the “child” category. This could be a child, a teenager, or even a small adult. The side airbags on the crash side of •...
  • Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children that are not big enough to properly wear the You should read the instructions provided with your vehicle seat belt (see section on “Child Restraint”) should child restraint or belt-positioning booster seat to make be secured in child safety seats or booster seats that are sure that you are using it properly.
  • Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! WARNING! • Relying on the airbags alone could lead to more After installing a child safety seat or booster seat on the passenger seat, do not adjust the back rest for- severe injuries in a collision.
  • Page 34 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag System Components from direction provided by the ORC. The ORC may The airbag system consists of the following: modify the rate of inflation based on the occupant size provided by the Occupant Classification Module. The •...
  • Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • The Driver and Passenger Airbag/Inflator Units are WARNING! located in the center of the steering wheel and the right side of the instrument panel. When the ORC detects a Ignoring the AIRBAG light in your instrument panel collision requiring the airbags, it signals the inflator could mean you won’t have the airbags to protect you units.
  • Page 36 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Knee Blocker Airbag helps protect the knees and If a Deployment Occurs working with the seatbelts, position you for the best WARNING! interaction with the airbags. Deployed airbags can’t protect you in another colli- sion.
  • Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 If you do have a collision which deploys the airbags, any or throat irritation, move to fresh air. If the irritation or all of the following may occur: continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s in- •...
  • Page 38 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • When a side impact above a predetermined threshold WARNING! occurs, the sensors signal the inflator on the impacted side of the vehicle. A large quantity of nontoxic • Do not put anything on or around the airbag nitrogen gas is generated to inflate the airbag.
  • Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • The operational readiness of the side airbag system is WARNING! verified by the airbag indicator light in the instrument cluster when turning the key in the ignition switch to • The door mounted side airbag deploys with con- the ON/RUN position.
  • Page 40 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How the Occupant Classification System (OCS) light (located in the center console) and AIRBAG warn- System Works ing light (located in the instrument cluster) are illumi- The Occupant Classification System (OCS) will classify nated the airbag will be disabled.
  • Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 will not inflate. For most children properly seated on the The following requirements must be strictly adhered to: front seat and most properly installed child restraint • Do not modify the front passenger seat assembly or systems, the airbag will be disabled and the PAD indica- components in any way.
  • Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How the Occupant Classification Module (OCM) How the Belt Tension Sensor (BTS) Works Works The Belt Tension Sensor (BTS) is located at the outboard The Occupant Classification Module (OCM) is located passenger lap belt anchor. The BTS creates a signal based beneath the passenger seat..
  • Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 How the Driver/Passenger Inflatable Knee NOTE: When using certain types of child seats, the Blockers Works passenger airbag light will remain off even though the When the ORC and the impact sensors detect a collision passenger front airbags are disabled.
  • Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the airbag is turned off when there is any other To turn OFF the passenger front airbag, use the on/off occupant at that position, the supplemental restraint switch located on the instrument panel. provided by the airbag will not be available.
  • Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 To Shut Off the Passenger Airbag: To Turn On the Passenger Airbag: • Place the ignition key in the on/off switch, turn the • Place the ignition key in the on/off switch, turn the key clockwise, and remove the key from the switch.
  • Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System The following requirements must be strictly adhered to: • Do not modify the front passenger seat assembly or WARNING! components in any way. • Unapproved modifications or service procedures •...

  • Page 47: Child Restraint

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Airbag Light Child Restraint You will want to have the airbags ready for Everyone in your vehicle needs to be buckled up all the your protection in case of a collision. While the time, babies and children, too.
  • Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints LATCH child restraint anchorage system. (See the There are different sizes and types of restraints for LATCH - Child Seat Anchorage System section.) children from newborn size to the child almost large •...
  • Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Here are some tips on getting the most out of your child NOTE: additional information refer restraint: www.seatcheck.org or call 1–866–SEATCHECK. • Before buying any restraint system, make sure that it Older Children and Child Restraints has a label certifying that it meets all applicable Safety Children who weigh more than 20 lbs.
  • Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats LATCH - Child Seat Anchorage System (Lower Children who are large enough to wear the shoulder belt Anchors and Tether for Children) comfortably, and whose legs are long enough to bend Your vehicle’s passenger seat is equipped with the child over the front of the seat when their back is against the restraint anchorage system called LATCH.
  • Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 The passenger seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean in to install the child restraint.
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE You will first loosen the adjusters on the lower straps and WARNING! on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages. Next, you After installing a child safety seat or booster seat on can attach the tether strap to the anchor by moving the the passenger seat, do not adjust the back rest for-...
  • Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 retractor action is restored. Any seat belt system will WARNING! loosen with time, so check the belt occasionally and pull it tight if necessary. Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or If your child restraint is equipped with a tether strap, child restraint.
  • Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To attach the tether strap to the anchor, move the Install the child restraint and return the seatback to an seatback fully forward. Pass the child restraint tether upright position. Remove slack from the tether strap hook over the top of the seat, through the strap near the according to the child restraint manufacturer’s directions.

  • Page 55: Engine Break-In Recommendations

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 ENGINE BREAK-IN RECOMMENDATIONS SAFETY TIPS The engine in your new Crossfire does not require a long Exhaust Gas break-in period. Following these few simple guidelines is all that is necessary for a good break-in. WARNING! •...

  • Page 56: Safety Checks You Should Make Inside

    56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • To avoid drawing exhaust gases into the vehicle, close during starting, have it replaced. If the light stays on or the rear liftgate/decklid while driving. However, if for comes on while driving, have the system checked by an some reason it must remain open, close all windows.
  • Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Fluid Leaks NOTE: Use of the air conditioning may cause puddles Check area under vehicle after overnight parking for fuel, of water to form under the vehicle. water, oil, or other fluid leaks. Also, if gasoline fumes are present, the cause should be corrected immediately.
  • Page 58 I n f o r ma t i o n P r o v i d e d b y :...

  • Page 59: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Convertible Top Operation ....62 Mirrors ......77 ▫...
  • Page 60 60 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Heated Seats (If Equipped) ....83 ▫ Windshield Wipers And Washer ... .90 ▫...
  • Page 61 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 61 ▫ Using The Universal Transceiver ..109 ▫ Security ......109 ▫...

  • Page 62: Convertible Top Operation

    62 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONVERTIBLE TOP OPERATION WARNING! WARNING! Before operating the switch for the convertible top, make sure that no persons can be injured by the The convertible top does not provide the structural moving parts (convertible top frame and tonneau protection that a reinforced metal roof does and the cover).

  • Page 63: To Lower The Top

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 63 To Lower The Top: CAUTION! WARNING! When opening and closing the convertible top, make sure that: Top operation can be suspended for a maximum of 10 • There is sufficient clearance of at least 6 ft. (1.8m) minutes.
  • Page 64 64 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! To avoid possible damage to the tonneau cover and To fully insure that no damage occurs, be sure that convertible top, do not allow the convertible top to the vehicle is at a complete stop before attempting to remain in the suspended position.
  • Page 65 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 65 NOTE: See label attached to underside of decklid. 2. Make sure the decklid is closed. CAUTION! Be sure to turn the ignition to the “ON/RUN” posi- tion before releasing the top from the windshield header.
  • Page 66 66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Once the release handle is rotated, the windows will automatically go down. 6. Push down on the rear of the convertible top switch to begin top operation. The rear of the top will unlatch and the tonneau cover will open before the top begins to fold.

  • Page 67: To Raise The Top

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 67 NOTE: Once the top is lowered and the audible signal CAUTION! is heard, you can continue to push the convertible top switch down or push it within 2 seconds to raise the To prevent mildew, the convertible top must be dry windows.
  • Page 68 68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Turn the ignition key to the ON/RUN position and NOTE: If the top is latched to the windshield header press down on the front of the convertible top switch. before the rear of the top is properly latched, an audible warning will sound and the top raising operation will stop.
  • Page 69 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 69 7. When the top engages to the header, turn the latch WARNING! handle counterclockwise just over one quarter turn to the lock position and push the latch handle up to the stored To prevent possible accidents, drive the vehicle only position.
  • Page 70 70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Once the cargo compartment divider is folded for- ward to increase the cargo compartment capacity, the tonneau cover flaps are exposed and can be damaged by long items being put into the cargo compartment. I n f o r ma t i o n P r o v i d e d b y :...

  • Page 71: Convertible Top Lamp And Audible Signal Chart

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 71 Convertible Top Lamp and Audible Signal Chart Top unlatched but not pushed up from wind- Below is a table containing all of the visual and audible shield header signals that can be seen or heard during top operation or Vehicle speed greater than if a fault is present.

  • Page 72: Console Features

    72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONSOLE FEATURES The console has a power outlet/cigar lighter, an ash tray with a coin holder, a cupholder (if equipped), and the passenger airbag light. In addition, there are switches to control the heated seats (if equipped), rear spoiler, elec- tronic stability program (ESP), hazard flashers, central locking, rear defroster and towing alarm.

  • Page 73: Storage Compartments (If Equipped)

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 73 Storage Compartments (If Equipped) There is a storage compartment in the console. To open the storage compartment, lift the lid with the finger depressions on either side. To close, lower the lid until the lock engages.

  • Page 74: Ashtray

    74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ashtray Lightly touch the bottom of the ashtray cover. The ashtray will open automatically. To remove the ashtray insert, pull the ashtray past the detent. Hold both sides of the insert, and pull up. To install the ashtray, place it in the frame and push down to engage.

  • Page 75: Coin Holder

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 Coin Holder up to a maximum of 15 amps. The outlet is protected by With the ashtray open, folding down the cover plate a 15 amp fuse, located behind the fuse cover on the left reveals the coin holder, which can accommodate nine end of the instrument panel.

  • Page 76: Glove Compartment

    76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Glove Compartment To lock the glove compartment, turn the key to the right and remove. To unlock, turn the key to the left and remove. Pull on the handle to open the glove compartment. CUPHOLDER (If Equipped) The cupholder is located in the console.

  • Page 77: Mirrors

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 MIRRORS Exterior Mirrors Folding Feature All exterior mirrors are hinged to move forward or Inside Day/Night Mirror rearward to resist damage. The hinges have three detent Adjust the mirror to center on the view through the rear positions: full forward, full rearward, and normal.

  • Page 78: Power Remote Control Outside Mirrors

    78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Remote Control Outside Mirrors The mirrors can be adjusted by using the remote control located in the console. Rotate the switch to the right to select the right mirror, rotate to the left to select the left mirror.

  • Page 79: Vanity Mirrors

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 Vanity Mirrors SEATS Your vehicle’s seats can be adjusted either manually or electrically, depending on how your vehicle is equipped. WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.

  • Page 80: Manual Seat Adjustments (If Equipped)

    80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: When moving the seat, be sure that there are no Manual Seat Adjustments (If Equipped) items in the footwell or behind the seats. Otherwise you Seat Height (Drivers Seat Only) could damage the seats. •...
  • Page 81 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 • Adjust the height of the head restraints by pulling Backrest Tilt them upwards manually. • Turn handwheel 2 forward or backward to adjust the • For a lower position, press release button 1 and push backrest tilt to your desired position which allows your arms to slightly bend when holding the steering down on the head restraints manually.

  • Page 82: Driver Eight-Way Power Seat (If Equipped)

    82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver Eight-Way Power Seat (If Equipped) The switches to adjust the power seats are located on the outboard side of each seat. The driver’s seat features eight-way power adjustment - horizontal, vertical, cush- ion tilt and back angle.

  • Page 83: Passenger Four-Way Power Seat (If Equipped)

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 Passenger Four-Way Power Seat (If Equipped) The switches to adjust the passenger seat are also on the outboard side of the seat. The passenger seat provides four-way adjustment - horizontal and back angle. After turning the ignition switch ON, you can choose the HI, LO, or OFF setting.

  • Page 84: To Open And Close The Hood

    84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD To open the hood, pull the release lever located inside your vehicle, below the instrument panel. WARNING! If the hood is not fully latched, it could fly up when Then, reach under the hood and pull upward on the the vehicle is moving, and block your forward vision.

  • Page 85: Interior Lights

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 INTERIOR LIGHTS Front Map/Reading Lights A two-position mode selector switch controls the interior These lights are located between the sun visors. A single lights located in the overhead console. centrally located switch operates both lights. The AUTO mode turns the lights on when a door is open Battery Saver Feature or ajar, or when locking or unlocking the vehicle.

  • Page 86: Instrument Panel Lighting

    86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Instrument Panel Lighting EXTERIOR LIGHTS With the parking lights or headlights on, rotate the Headlights and Parking Lights dimmer control to the left of the speedometer to increase When the headlight switch is turned clockwise from OFF or decrease brightness of the instrument panel.

  • Page 87: Daytime Running Lights (Where Applicable)

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Lights-On Reminder Fog Lights (If Equipped) If the headlights or parking lights are left on after the To operate the fog lights, pull the headlight ignition is turned off, a warning will sound if the driver’s switch out one stop, with the parking lights door is opened.

  • Page 88: Multifunction Control Lever

    88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals CAUTION! Move the multifunction control lever up to activate the right turn signal; move the lever down to activate the left Standing lamps are intended for short term use when turn signal. An arrow on the inside of the speedometer parking.

  • Page 89: Headlight Dimmer Switch

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Headlight Dimmer Switch Push the multifunction control lever toward the instru- ment panel to turn the headlights to high beam. Pull the lever toward you to switch to low beam. I n f o r ma t i o n P r o v i d e d b y :...

  • Page 90: Passing Light

    90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Passing Light NOTE: Wiper speed is altered when the vehicle is You can signal another vehicle with your headlights by stopped with the wipers on. If the speed setting is lightly pulling the multifunction control lever toward the intermittent, the wipers will stop wiping when the ve- steering wheel.

  • Page 91: Mist Function

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Push the end of the lever inward and hold it to activate the wiper and washer together. WARNING! Mist Function Sudden loss of visibility through the windshield Push the end of the multifunction control lever inward could lead to an accident.

  • Page 92: Telescoping Steering Column

    92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TELESCOPING STEERING COLUMN WARNING! Unlock the steering column by pulling out the handle located directly below the column. The indicator light Do not adjust the steering wheel while driving. The located in the instrument cluster will come on. To telescoping adjustment must be locked while driv- lengthen or shorten the steering column, pull out or push ing.

  • Page 93: Tire Pressure Monitor System (If Equipped)

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 more of your tires is significantly under—inflated. Ac- cordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure, Driving on a significantly under-inflated tire causes the tire to over- heat and can lead to tire failure.
  • Page 94 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The TPM system will cause the indicator lamp in the instrument cluster to illuminate whenever the pressure in one tire falls 25% below the recommended pressure shown on the vehicle’s tire label. NOTE: The pressure in your tires changes with tem- perature.
  • Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 NOTE: The standard TIREFIT system (refer to What To Do In Emergencies for more information) is specifically designed to operate in conjunction with the TPM system, and will not damage the sensors. If your tire pressure is low, you should correct your tire inflation pressure as soon as possible and inspect all of your tires.

  • Page 96: Rear Spoiler

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. This device must accept any interference that may be received, including interference that may cause undes- ired operation. NOTE: Changes and modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 The spoiler control also incorporates an emergency stop Should a malfunction occur that prevents the spoiler feature. If, for any reason, spoiler motion needs to be from deploying automatically, a red warning light will stopped, pressing either the top or bottom of the switch illuminate in the override switch and an audible warning will stop the spoiler motion.

  • Page 98: Brake Assist System (Bas)

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BRAKE ASSIST SYSTEM (BAS) WARNING! WARNING! Do not drive the vehicle at speeds above 62 mph (100 km/h) if the red spoiler warning indicator is illumi- BAS cannot prevent the natural laws of physics from nated.

  • Page 99: Electronic Stability Program (Esp)

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 BAS complements the antilock brake system (ABS). Ap- turned to the ON/RUN position. They should go out plying the brakes very quickly results in maximum BAS with the engine running. If the BAS/ESP malfunction assistance.
  • Page 100 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ESP enhances directional control and reduces driving To improve the vehicle’s traction when driving with wheel spin of the vehicle under various driving condi- snow chains, or starting off in deep snow, sand or gravel, tions.

  • Page 101: Synchronizing Esp

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 wheel regains sufficient traction. The traction control Synchronizing ESP engages at approximately 24 mph (40 km/h), and If the power supply was interrupted (battery discon- switches off at 50 mph (80 km/h). nected or discharged), the BAS/ESP malfunction indica- tor light may be illuminated with the engine running.

  • Page 102: Electronic Speed Control

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL The electronic speed control automatically maintains the set speed by actively regulating the throttle setting. Any speed above approximately 20 mph (30 km/h) can be maintained with the electronic speed control by operat- ing the lever.

  • Page 103: To Vary The Speed Setting

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 To Vary The Speed Setting If a set speed needs to be adjusted slightly, lift up or hold down the speed control lever briefly until the desired speed is reached. A single tap on the lever up or down will change the speed in 0.6 mph (1 km/h) increments.

  • Page 104: To Deactivate

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate To Resume Speed A soft tap on the brake pedal, or normal brake pressure To resume a previously set speed, pull the speed control while slowing the vehicle, will deactivate the speed lever toward you, and then release.

  • Page 105: Using Speed Control On Hills

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Using Speed Control On Hills For vehicles with manual transmission: Your vehicle is equipped with interactive speed control. The set speed control is switched off when declutching This feature activates when driving up or down hills with exceeds four seconds during downshifting.

  • Page 106: Programming The Universal Transceiver

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! A moving garage door can cause injury to people and Vehicle exhaust contains carbon monoxide, a danger- pets in the path of the door. People or pets could be ous gas. Do not run the vehicle’s engine while seriously or fatally injured.
  • Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 3. Erase the factory test codes by pressing the two 5. Using both hands, press the hand-held transmitter outside buttons. Release the buttons when the light in the button and the desired universal transceiver button. Do overhead console display begins to flash (about 20 sec- not release the buttons until Step 6 has been completed.

  • Page 108: Gate Operator/Canadian Programming

    108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the indicator light blinks rapidly for two seconds The universal transceiver should now activate your roll- and then turns to a constant light, continue with ing code equipped device. Programming Steps 8-10 to complete programming of If you do not successfully program the universal trans- a rolling code equipped device (most commonly a ceiver to learn the signal of your hand-held transmitter,...
  • Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 5. Continue to press and hold the universal transceiver than 30 seconds. The universal transceiver is now in button while you press and release every two seconds the program (or learning) mode and can be pro- (“cycle”) your hand-held transmitter until the frequency grammed at any time beginning with Programming signal has successfully been accepted by the universal...
  • Page 110 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This device complies with part 15 of FCC rules and with UMBRELLA HOOK RS-210 of Industry Canada. Operation is subject to the Your Crossfire is equipped with an umbrella hook. This following conditions: feature is located behind and between the two seats, just above the map pocket.

  • Page 111: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Driver – L/R ......133 Instruments And Controls ....112 ▫...

  • Page 112: Instruments And Controls

    112 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENTS AND CONTROLS I n f o r ma t i o n P r o v i d e d b y :...

  • Page 113: Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 113 INSTRUMENT CLUSTER cluster, or turning the key in the ignition switch to the The instrument cluster displays are activated by either ON/RUN position. opening the door, pressing the left button within the I n f o r ma t i o n P r o v i d e d b y :...

  • Page 114: Instrument Cluster Description

    114 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTION WARNING! 1. Low Windshield Washer System Fluid Level Do not overfill the washer reservoir. Do not attempt Warning Light to fill to the top of the filler neck. Fluid may leak out With the key in the ignition switch turned to onto the floor or driveway causing a potential slip the ON/RUN position, the indicator light...
  • Page 115 UNDERSTANDING YOUR INSTRUMENT PANEL 115 level in the reservoir or the coolant temperature is too CAUTION! high (see the Temperature gauge section). The TPMS is designed to monitor your tire pressure To check the coolant level, the vehicle must be parked on and will not function as a tire pressure gauge.
  • Page 116 116 UNDERSTANDING YOUR INSTRUMENT PANEL If the pointer rises to the red (Hot) area, stop the vehicle down. The switch is automatically canceled when the and turn off the engine until the problem is corrected. steering wheel is turned to a large enough degree. The arrows in the instrument cluster will flash in unison CAUTION! with the respective exterior turn signal.
  • Page 117 UNDERSTANDING YOUR INSTRUMENT PANEL 117 The red markings on the tachometer indicate excessive WARNING! engine speed. Ease off on the accelerator before reaching the red area. Driving a vehicle with the brake light on is danger- ous. Part of the brake system may have failed. It will 10.
  • Page 118 118 UNDERSTANDING YOUR INSTRUMENT PANEL The indicator light will come on when the exterior light 13. Brake Assist Indicator Light fails. If a brake light fails, the light outage indicator will The indicator light for the Brake Assist Sys- come on when applying the brake and stays on until the tem (BAS) is combined with the Electronic engine is turned off.
  • Page 119 UNDERSTANDING YOUR INSTRUMENT PANEL 119 The seat belt indicator light will remain lit until the seat CAUTION! belts are fastened. The accessory drive belt also drives the water pump. 15. Charging System Indicator Light Operating the vehicle with a failed belt can cause Should the charging system indicator light engine overheating and possible severe engine fail to come on prior to starting when the key...
  • Page 120 120 UNDERSTANDING YOUR INSTRUMENT PANEL • Press the button twice (with the key removed or in The display can be adjusted with the knob/button lo- cated to the left of the clock. the OFF/LOCK or ACC position). 18. Gear Indicator 21.
  • Page 121 UNDERSTANDING YOUR INSTRUMENT PANEL 121 To reset the trip odometer, press the knob/button once The counter can also be reset by any individual after the with the key in the ON/RUN position. Press the knob/ indicated service has been performed. To do so: button twice with the key removed or in the OFF/LOCK 1.
  • Page 122 122 UNDERSTANDING YOUR INSTRUMENT PANEL or while driving when reaching the service warning starts combined with short distance driving in which the threshold. It can be canceled manually by pressing the engine does not reach normal operating temperature, knob/button. reduce the interval between services. Once the suggested term has passed, the message plus However you choose to set your reference numbers, the either the symbol for Service A or the symbol for...
  • Page 123 UNDERSTANDING YOUR INSTRUMENT PANEL 123 the bulb is not lit during starting, have it replaced. If the WARNING! light stays on, or comes on while driving, have the system checked by an authorized dealer. The outside temperature indicator is not designed to serve as an ice-warning device and is unsuitable for WARNING! that purpose.
  • Page 124 124 UNDERSTANDING YOUR INSTRUMENT PANEL towing. However, we recommend that you have the WARNING! system checked at an authorized dealer as soon as possible. Do not drive the vehicle until you have properly locked the steering column. If the vehicle is not driving normally, and the Check Engine light flashes or remains on continuously, it is an alert to serious conditions that could lead to loss of power 26.
  • Page 125 UNDERSTANDING YOUR INSTRUMENT PANEL 125 • OK 28. Oil Level Indicator Light • -1.0 Q (-1.0L) With the key in the ignition switch turned to • -1.5 Q (-1.5L) the ON/RUN position, the oil level indicator light comes on. It should go out immediately •...

  • Page 126: Infinity Modulus" Am/Fm Stereo Radio With Single-Disc Cd Player And Gps Navigation

    126 UNDERSTANDING YOUR INSTRUMENT PANEL “INFINITY MODULUS” AM/FM STEREO RADIO WITH SINGLE-DISC CD PLAYER AND GPS NAVIGATION (OPTIONAL - See separate User’s Manual) AM/FM STEREO RADIO WITH SINGLE-DISC CD PLAYER INFINITY MODULUS Entertainment Systems A premium Infinity Modulus AM/FM stereo, single-disc CD audio system is standard equipment on some mod- Power/Volume Control els.
  • Page 127 UNDERSTANDING YOUR INSTRUMENT PANEL 127 Audio (AUD) Settings the AUD button for more than eight seconds until ALL LINEAR appears (which affects both radio and CD). • Bass (BASS) • Mute function (MUTE) Press the AUD button repeatedly until BASS appears. Rotate the right rotary control for the desired level To activate the mute function in all modes and wave- (from -9 to +9).
  • Page 128 128 UNDERSTANDING YOUR INSTRUMENT PANEL FM AS – An autostore feature will store the 9 current Storing FM stations – 10 frequencies can be stored on FM stations with the strongest signal on station buttons 1-9 in 1 and on FM 2 by pressing a multifunction button for the order of their signal quality.
  • Page 129 UNDERSTANDING YOUR INSTRUMENT PANEL 129 • R B – R&B currently available PTY by turning the right rotary control/push button and the program type scan search • CLS ROCK – Classic Rock begins. • SOFT R B – Soft R&B Press the button again to keep the received program.

  • Page 130: Cd Player Operation

    130 UNDERSTANDING YOUR INSTRUMENT PANEL AM-AM AS repeatedly until AM AS is displayed to perform an The system has two AM modes available. Press the AM autostore scan. Press the multifunction button labeled AS button repeatedly until the band or operation mode is repeatedly until AS-SEEK is displayed.
  • Page 131 UNDERSTANDING YOUR INSTRUMENT PANEL 131 Features of the CD player: CAUTION! • Skipping Tracks Before inserting a CD, assure that a CD is not already Turn the right rotary control/push button. Turn fur- in the player. Press the CD button; if the display ther to the left or right to skip multiple tracks.

  • Page 132: User Menu

    132 UNDERSTANDING YOUR INSTRUMENT PANEL • Relative Time Display (T) • DRIVER – Left/Right Hand Drive Setting • PHONE – Telephone Characteristics Press the multifunction button T for the time of the currently playing track to be displayed for approxi- To enter the USER menu, press the OPT button for more mately eight seconds.

  • Page 133: Mono/Stereo

    UNDERSTANDING YOUR INSTRUMENT PANEL 133 Mono/Stereo Driver – L/R In order to suppress reception-related interference, three If a telephone with hands-free operation is installed, the different parameters can be set to optimize reception. call is routed through the speaker system. The setting DRIVER is used to set the appropriate speaker side (left To activate, call up the user menu, then press the right or right).

  • Page 134: Compact Disc Maintenance

    134 UNDERSTANDING YOUR INSTRUMENT PANEL Call up the user menu, then press the right rotary 7. Do not store the disc where temperatures may become control/push button repeatedly until AUDIO PH or PH too high. MUTE is displayed (depending on the currently selected RADIO ANTENNA setting, you may need to turn the knob also for your The radio antenna is located in the rear liftgate glass on...

  • Page 135: Radio Operation And Cellular Phones

    UNDERSTANDING YOUR INSTRUMENT PANEL 135 RADIO OPERATION AND CELLULAR PHONES 1. Driver Temperature Control Under certain conditions, the operation of a cellular 2. Passenger Temperature Control phone in your vehicle can cause erratic or noisy perfor- mance from your radio. This condition may be lessened 3.

  • Page 136: Temperature Control

    136 UNDERSTANDING YOUR INSTRUMENT PANEL The settings and controls are as follows: Basic Setting - Heater Select a temperature for each side of the pas- Temperature Control senger compartment. Select air volume with Use the driver or passenger temperature control to the fan control switch and set the fan control at regulate the temperature of the air inside the passenger least to position 2 to prevent windows from...

  • Page 137: Basic Setting - Air Conditioner

    UNDERSTANDING YOUR INSTRUMENT PANEL 137 Basic Setting - Air Conditioner NOTE: The dot between the air distribution control Press the air conditioning ON/OFF switch. The icons is a mix position between the two modes. light in the switch will illuminate. Select a Slight changes in engine speed or power may be noticed temperature for each side of the passenger when the compressor is on.
  • Page 138 138 UNDERSTANDING YOUR INSTRUMENT PANEL control switch to position 1 or higher. Close the center, Windshield Fogged Up On Outside left, and right side air outlets. Turn the defroster outlets Switch on the windshield wipers. Set the air distribution for the side windows to the detent position. control switch to the defrost position.
  • Page 139 UNDERSTANDING YOUR INSTRUMENT PANEL 139 Climate Control - OFF inside the switch starts blinking. As soon as the battery To switch the climate control off, set the air volume has sufficient voltage, the defroster automatically turns control switch to position 0. The fresh air supply to the itself back on.

  • Page 140: Dust Filter (If Equipped)

    140 UNDERSTANDING YOUR INSTRUMENT PANEL after approximately 30 minutes, at outside temperatures To cancel, press the recirculation button. The indicator above approximately 40°F (5°C); after approximately five light in the button goes out. The system will automati- minutes, if the A/C button is pressed. cally shut off if you turn the key in the ignition switch to the ON/RUN position, after approximately 30 minutes, At high outside temperatures, the system automatically...

  • Page 141: Operating Tips

    UNDERSTANDING YOUR INSTRUMENT PANEL 141 Operating Tips I n f o r ma t i o n P r o v i d e d b y :...
  • Page 142 I n f o r ma t i o n P r o v i d e d b y :...

  • Page 143: Starting And Operating

    STARTING AND OPERATING CONTENTS ▫ Park Position ......151 Starting Procedures ....145 ▫...
  • Page 144 144 STARTING AND OPERATING ▫ Synchronizing ESP ....161 Tire Pressure Monitor System (If Equipped) . . 181 ▫ ESP Control Switch ....161 ▫...

  • Page 145: Starting Procedures

    STARTING AND OPERATING 145 STARTING PROCEDURES release when the engine starts. If the engine will not run, turn the key counterclockwise to the OFF/LOCK posi- WARNING! tion and repeat the starting procedure. If there are several unsuccessful attempts, have the system checked at the Do not leave animals or children inside parked nearest authorized dealer.

  • Page 146: Extremely Cold Weather (Below -20°F Or -29°C)

    146 STARTING AND OPERATING NOTE: Due to the starter non-repeat feature, the key If Engine Fails to Start must be turned completely to the left before attempting CAUTION! to start the engine again. Do not try to push or tow your vehicle to get it started.

  • Page 147: After Starting

    STARTING AND OPERATING 147 accelerator pedal all the way to the floor and hold it there After Starting while cranking the engine. This should clear any excess The idle speed will automatically decrease as the engine fuel in case the engine is flooded. warms up.

  • Page 148: Recommended Shift Speeds

    148 STARTING AND OPERATING Fully depress the clutch pedal before you shift gears. As NOTE: During cold weather, until the transmission you release the clutch pedal, lightly depress the accelera- lubricant has warmed, you may have difficulty shifting. tor pedal. This is normal and not harmful to the transmission.

  • Page 149: Automatic Transmission

    STARTING AND OPERATING 149 Automatic Transmission WARNING! When leaving the vehicle, always remove the key from the ignition switch, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could move the gearshift lever, which could result in an accident or serious injury.

  • Page 150: Stopping

    150 STARTING AND OPERATING The gear shifting process is continuously adapted, de- WARNING! pendent on the driving style, the driving situation and the road characteristics. It is dangerous to shift the selector lever out of PARK or NEUTRAL if the engine speed is higher than idle The selector lever is automatically locked while in the speed.

  • Page 151: Maneuvering

    STARTING AND OPERATING 151 Maneuvering NOTE: The key can be removed from the ignition To maneuver in tight areas, control the vehicle speed by switch only with the selector lever in the PARK position. gradually releasing the brakes. Accelerate gently and With the key removed, the selector lever is locked in the never abruptly step on the accelerator.

  • Page 152: Reverse

    152 STARTING AND OPERATING the tool from the opening, the cover will not close fully. Neutral Only after moving the selector lever to the “D+” and No power is transmitted from the engine to the drive “D-” positions does the cover return to its closed posi- axle.
  • Page 153 STARTING AND OPERATING 153 into another gear that allows for quicker acceleration or WARNING! to slow the vehicle down is possible. Downshifts can also be performed. On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive Press and hold the selector lever in the “D-”...

  • Page 154: Gear Ranges

    154 STARTING AND OPERATING Gear Ranges Program mode selector switch “P” PARK The transmission is provided with a selector switch for Standard “S” and Winter/Wet “W” (snow and ice) pro- NOTE: If the key is in the ON/RUN position, you must gram modes.

  • Page 155: Emergency Operation (Limp Home Mode)

    STARTING AND OPERATING 155 down into a lower gear. Rapid release of the accelerator Emergency Operation (Limp Home Mode) pedal will normally result in an upshift. This gear shift- If vehicle acceleration worsens, or the transmission no ing process is dependent on the current vehicle speed. longer shifts, the transmission is most likely operating in Limp Home Mode which engages when there is a For Winter/Wet (snow and ice) mode, press the “W”...

  • Page 156: Parking Brake

    156 STARTING AND OPERATING Have the transmission checked at your authorized dealer as soon as possible. PARKING BRAKE When you apply the parking brake with engine running, the brake system warning light in the instrument cluster will come on. NOTE: This light, when illuminated with parking brake application, shows only that the parking brake is on.

  • Page 157: Brake System

    STARTING AND OPERATING 157 precaution, turn the front wheels toward the curb on a BRAKE SYSTEM downhill grade and away from the curb on an uphill Your vehicle is equipped with power brakes as standard grade. equipment. In the event power assist is lost for any reason (for example, repeated brake applications with the The parking brake should always be applied when the engine off), the brakes will still function.
  • Page 158 158 STARTING AND OPERATING The BAS complements the antilock brake system (ABS). Once the brake pedal is released, the BAS is deactivated. Applying the brakes very quickly results in maximum The malfunction indicator light for the BAS is combined BAS assistance. To receive the benefit of the system you with the Electronic Stability Program (ESP) malfunction must apply continuous, full braking power during the indicator light.

  • Page 159: Electronic Stability Program (Esp)

    STARTING AND OPERATING 159 system. As a result, it is possible that only partial engine output will be available, and pressing the accelerator pedal will require more effort. If the BAS malfunctions, the brake system functions in the usual manner, but without BAS. With the ABS malfunctioning, the BAS and ESP will be disabled.
  • Page 160 160 STARTING AND OPERATING WARNING! CAUTION! ESP cannot prevent the natural laws of physics from If the vehicle is towed with the front axle raised (see acting on the vehicle, nor can it increase the traction the What To Do In Emergencies section in this afforded.

  • Page 161: Synchronizing Esp

    STARTING AND OPERATING 161 Synchronizing ESP ESP Control switch If the power supply was interrupted (battery discon- The ESP control switch is located in the center console. nected or discharged), the BAS/ESP malfunction indica- When the ESP is switched off, the warning light in the tor light may be illuminated with the engine running.

  • Page 162: Anti-Lock Brake System (Abs)

    162 STARTING AND OPERATING illuminated. With the ESP system switched off, the en- Anti-Lock Brake System (ABS) gine torque reduction feature is cancelled. Therefore, the The ABS gives increased vehicle stability and brake enhanced vehicle stability offered by ESP is unavailable. performance under most braking conditions.
  • Page 163 STARTING AND OPERATING 163 In the case of an emergency brake maneuver, keep The anti-lock brake system conducts a low-speed self-test continuous full pressure on the brake pedal. In this at about 12 mph (20 km/h). If you have your foot lightly manner only can the ABS be most effective.
  • Page 164 164 STARTING AND OPERATING The ABS malfunction indicator light in the instrument When the ABS malfunction indicator light in the instru- cluster comes on with the key in the ignition switch ment cluster comes on while the engine is running, it turned to the ON/RUN position, and should go out with indicates that the ABS has detected a malfunction and has the engine running.
  • Page 165 STARTING AND OPERATING 165 WARNING! WARNING! ABS cannot prevent the natural laws of physics from To use your brakes and accelerator more safely, follow these tips: acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the con- •...

  • Page 166: Brake Pad Break-In

    166 STARTING AND OPERATING Brake Pad Break-In Upon initial start-up in cold weather, the power The brakes on your vehicle do not require a long break-in steering pump may make noise for a short period of period, but avoid repeated hard brake applications from time.

  • Page 167: Tire Safety Information

    STARTING AND OPERATING 167 TIRE SAFETY INFORMATION NOTE: European Metric tire sizing is based on Euro- pean design standards. Tires designed to this standard Tire Markings have the tire size molded into the sidewall beginning with the section width. The letter P is absent from this tire size designation.
  • Page 168 168 STARTING AND OPERATING EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%)
  • Page 169 STARTING AND OPERATING 169 Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.

  • Page 170: Tire Identification Number (Tin)

    170 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire tires as mounted on the vehicle. If the TIN is not found on however the date code may only be on one side.

  • Page 171: Tire Loading And Tire Pressure

    STARTING AND OPERATING 171 Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: Some vehicles have a “Tire and Loading Infor- mation” placard located on the driver’s side “B” pillar. This placard tells you important information about: 1.
  • Page 172 172 STARTING AND OPERATING Loading To determine the maximum loading conditions of your The vehicle maximum load on the tire must not exceed vehicle, locate the statement “The combined weight of the load carrying capacity of the tire on your vehicle. You occupants and cargo should never exceed XXX kg or XXX will not exceed the tire’s load carrying capacity if you lbs.”...
  • Page 173 STARTING AND OPERATING 173 4. The resulting figure equals the available amount of manual to determine how this reduces the available cargo and luggage load capacity. For example, if “XXX” cargo and luggage load capacity of your vehicle. amount equals 1400 lbs. and there will be five 150 lb. NOTE: The following table shows examples on how to passengers in your vehicle, the amount of available cargo calculate total load, cargo/luggage and towing capacities...
  • Page 174 174 STARTING AND OPERATING I n f o r ma t i o n P r o v i d e d b y :...

  • Page 175: Tires-General Information

    STARTING AND OPERATING 175 1. Safety— WARNING! WARNING! Overloading of your tire is dangerous. Overloading can cause tire failure, affect vehicle handling, and Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause accidents. recommended load capacity for your vehicle-never •...

  • Page 176: Tire Inflation Pressures

    176 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Underinflation also increases tire rolling resistance and results in higher fuel consumption.
  • Page 177 STARTING AND OPERATING 177 Example: If garage temperature = 68° F (20° C) and the CAUTION! outside temperature = 32° F (0° C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), After inspecting or adjusting the tire pressure always which equals 1 psi (7 kPa) for every 12°...

  • Page 178: Radial-Ply Tires

    178 STARTING AND OPERATING Cuts and punctures in radial tires are repairable only in WARNING! the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Tire Spinning tires could cause them to fail.

  • Page 179: Tread Wear Indicators

    STARTING AND OPERATING 179 Tread Wear Indicators Replacement Tires Tread wear indicators are in the original equipment tires The tires on your new vehicle provide a balance of many to help you in determining when your tires should be characteristics. They should be inspected regularly for replaced.
  • Page 180 180 STARTING AND OPERATING Recommended Tire Inflation Pressures WARNING! • When obtaining replacement tires, assure that the Sport Performance (Y speed rating) tires and All-Season Performance (W speed rating) tires tires are specified for replacement on the Crossfire. Tires with the same size, speed, or load ratings that Front 225/40 ZR18 .

  • Page 181: Alignment And Balance

    STARTING AND OPERATING 181 Improper alignment will not cause vehicle vibration. CAUTION! Vibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and Replacing original tires with tires of a different size avoid tire cupping and spotty wear. may result in false speedometer and odometer read- ings.
  • Page 182 182 STARTING AND OPERATING cannot be expected to function as a tire pressure gauge. NOTE: A TPMS does not replace normal tire mainte- There can be a delay between the instant you adjust the nance. air pressure in a tire and when the system updates the CAUTION! display.

  • Page 183: General Information

    DISC is the only tire chain system reduce cold inflation pressure below the TPMS setpoint. approved for use on the Chrysler Crossfire. For example, tires inflated to the proper cold inflation Chains should only be used on the rear wheels and only...

  • Page 184: Original Equipment Tires

    184 STARTING AND OPERATING ORIGINAL EQUIPMENT TIRES SNOW TIRES Your vehicle is equipped with either sport performance Some countries or regions require the use of snow tires tires or all-season performance tires. The sport perfor- during winter. See the recommended snow type winter mance tires offer the maximum road handling capability tire applications in this section.

  • Page 185: Tire Rotation Recommendations

    STARTING AND OPERATING 185 If you need snow tires, the recommended size for the These effects can be reduced by timely rotation of tires. front and rear tires is the same size as the original The benefits of rotation are especially worthwhile with equipment front tires.

  • Page 186: Fuel Requirements

    186 STARTING AND OPERATING FUEL REQUIREMENTS Your engine is designed to meet all emis- sions regulations and provide satisfactory fuel economy and optimum performance when using high quality unleaded gaso- line having an octane rating of 91 or higher. DaimlerChrysler Corporation re- quires the use of 91 octane or higher premium fuel to minimize the potential for engine damage.

  • Page 187: Reformulated Gasoline

    STARTING AND OPERATING 187 Over 60 automobile manufacturers around the world Gasoline/Oxygenate Blends have issued and endorsed consistent gasoline specifica- Some fuel suppliers blend unleaded gasoline with mate- tions (the World Wide Fuel Charter, WWFC) to define rials called oxygenates such as 10% ethanol, MTBE and fuel properties necessary to deliver enhanced emissions, ETBE.

  • Page 188: Mmt In Gasoline

    188 STARTING AND OPERATING MMT in Gasoline Materials Added to Fuel MMT is a manganese containing metallic additive that is All gasoline sold in the United States is required to blended into some gasolines to increase the octane num- contain effective detergent additives. Use of additional ber.

  • Page 189: Adding Fuel

    STARTING AND OPERATING 189 of unleaded gasoline having lower sulfur to determine if CAUTION! the problem is fuel-related prior to returning your vehicle to an authorized dealer for service. Damage to the fuel system or emission control sys- tem could result from using an improper gas cap. A CAUTION! poorly fitting cap could let impurities into the fuel system.
  • Page 190 190 STARTING AND OPERATING With the key in the ignition switch turned to the ON/ WARNING! RUN position, the fuel reserve warning light comes on. It should go out immediately when the engine is running. • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the If the warning light does not go out after starting the tank is filled.

  • Page 191: Vehicle Loading

    STARTING AND OPERATING 191 VEHICLE LOADING Roof Luggage Rack The load carrying capacity of your vehicle is in the Convertible Top Vehicles following chart and on the tire pressure label attached to the driver door pillar. CAUTION! Vehicle Loading Capacities To prevent damage to the convertible top, DO NOT Front Seat Occupants .

  • Page 192: Trailer Towing

    192 STARTING AND OPERATING CAUTION! WARNING! • To prevent damage to the roof of your vehicle, DO Cargo must be securely tied before driving your NOT carry any loads on the roof luggage rack vehicle. Improperly secured loads can fly off the which may come in contact with the roof panel.

  • Page 193: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES CONTENTS ▫ Traction ......205 Hazard Warning Flasher ....194 If Your Engine Overheats .

  • Page 194: Hazard Warning Flasher

    194 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER NOTE: With extended use, the flasher may run down The flasher switch is located in the console. Push in your battery. the flasher switch and all front and rear directional IF YOUR ENGINE OVERHEATS signals will flash.

  • Page 195: Tirefit Tire Repair And Jacking

    WHAT TO DO IN EMERGENCIES 195 NOTE: There are steps that you can take to slow down WARNING! an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to A hot cooling system is dangerous. You or others the cooling system and turning off the A/C removes this could be badly burned by steam or boiling coolant.
  • Page 196 196 WHAT TO DO IN EMERGENCIES WARNING! Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with ex- tremely low tire pressure or on a flat tire, or a damaged wheel can pose a hazard while driving. TIREFIT should not be used in such circumstances.
  • Page 197 WHAT TO DO IN EMERGENCIES 197 Sealing tire with TIREFIT 10. Insert the power plug (4) into the power point on the instrument panel. 1. Set the parking brake and turn on the hazard warning flashers. 11. Turn the ignition key to the ON/RUN position. 2.

  • Page 198: Preparations For Jacking

    198 WHAT TO DO IN EMERGENCIES 16. If a tire pressure of 26 psi (180 kPa) is obtained, press NOTE: Replace the TIREFIT sealant bottle once every the air pump switch to 0, turn the ignition switch to the four years to assure optimum operation of the system. OFF/LOCK position, and disconnect the TIREFIT sys- NOTE: If TIREFIT is liquid, clean water and a damp tem.
  • Page 199 WHAT TO DO IN EMERGENCIES 199 WARNING! Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or repairing a tire. Jacking the vehicle should only be necessary in the event that a tire has been severely damaged, and must be replaced.

  • Page 200: Jack Location And Instructions

    200 WHAT TO DO IN EMERGENCIES • Block the wheel diagonally opposite the flat tire. Jack Location and Instructions 1. Remove the jack and jack handle from stowage be- neath the cargo compartment carpet. • Passengers must not remain in the vehicle when the 2.
  • Page 201 WHAT TO DO IN EMERGENCIES 201 I n f o r ma t i o n P r o v i d e d b y :...
  • Page 202 202 WHAT TO DO IN EMERGENCIES NOTE: Do not raise the vehicle until you are sure the 5. Lower the vehicle by cranking the handle counter- jack is securely engaged, as shown. clockwise, then remove the jack assembly. NOTE: Before storing the jack, it should be fully collapsed.

  • Page 203: Jump-Starting The Battery

    WHAT TO DO IN EMERGENCIES 203 JUMP-STARTING THE BATTERY WARNING! WARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t Take care to avoid the radiator cooling fan whenever lean over battery when attaching clamps or allow the the hood is raised.
  • Page 204 204 WHAT TO DO IN EMERGENCIES 1. Wear eye protection and remove any metal jewelry 4. Connect one end of a jumper cable to the positive such as watch bands or bracelets that might make an jump-start attachment of the booster battery. Connect the inadvertent electrical contact.

  • Page 205: Driving On Slippery Surfaces

    WHAT TO DO IN EMERGENCIES 205 6. Start the engine in the vehicle which has the booster Traction battery, let the engine idle a few minutes, then start the When driving on wet or slushy roads, it is possible for a engine in the vehicle with the discharged battery.

  • Page 206: Freeing A Stuck Vehicle

    206 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE TOWING A DISABLED VEHICLE In order to free a stuck vehicle you must turn off the We recommend that the vehicle be transported using flat Electronic Stability Program (ESP) before attempting to bed equipment.
  • Page 207 WHAT TO DO IN EMERGENCIES 207 Always comply with applicable state or local towing CAUTION! ordinances. If the vehicle is towed with the front wheels raised, CAUTION! the engine must be shut off (key in the ignition switch turned to the OFF/LOCK or ACC positions). •...

  • Page 208: Towing Eyes

    208 WHAT TO DO IN EMERGENCIES Towing Eyes The vehicle is equipped with front and rear towing eyes to allow towing with the wheels on the ground or to allow the vehicle to be easily drawn up on a flatbed tow truck.
  • Page 209 WHAT TO DO IN EMERGENCIES 209 Insert the tool (or similar sized screwdriver) into the slot in the grille as shown (the tool must be inserted far enough to engage the clip on the left side of the grille). Push the tool to the left to disengage the clip and detach the grille.

  • Page 210: Tow-Away Alarm

    210 WHAT TO DO IN EMERGENCIES Tow-Away Alarm To prevent triggering the tow-away alarm feature, press Once the alarm system has been armed, the exterior the tow-away alarm switch to turn off the tow-away vehicle lights will flash and an alarm will sound when alarm before towing the vehicle, or when parking on a anyone attempts to raise the vehicle for towing.

  • Page 211: Convertible Top Emergency Operation

    WHAT TO DO IN EMERGENCIES 211 CONVERTIBLE TOP EMERGENCY OPERATION If the convertible top cannot be closed using the convert- ible top switch, check the following: • Is the decklid closed properly? • Is there sufficient battery voltage? Start the engine if necessary.

  • Page 212: Relieving Hydraulic Pressure

    212 WHAT TO DO IN EMERGENCIES Relieving Hydraulic Pressure CAUTION! NOTE: The hydraulic pressure must be relieved before Ensure that the decklid is closed while raising the the top can manually be raised or lowered. convertible top manually to prevent the possibility of 1.
  • Page 213 WHAT TO DO IN EMERGENCIES 213 4. Open the tonneau cover and secure it in the upright NOTE: Do not let go of the convertible top as it may fall position. back into the convertible top storage compartment. 5. Pull up hard on the upper section of the convertible top to move it out of its storage compartment.
  • Page 214 214 WHAT TO DO IN EMERGENCIES 6. Move the convertible top toward the windshield 8. Place the rear window section of the convertible top in header. its vertical position. 9. Close the tonneau cover by placing hands near the edges (arrows) and slowly lowering it. The tonneau cover must lock in the first notch of the compartment cover catch.
  • Page 215 WHAT TO DO IN EMERGENCIES 215 10. Lock the convertible top storage compartment by 11. Lower the rear window section of the convertible top placing the tool on the bolt between the backrest and the down and lock into the tonneau cover. tonneau cover.
  • Page 216 216 WHAT TO DO IN EMERGENCIES 13. Turn the latch handle just past one quarter turn clockwise and pull the convertible top frame carefully down until it meets the windshield header attachment points. 15. Fold the latch handle up. The convertible top is now locked onto the windshield header.

  • Page 217: Opening A Locked Decklid

    WHAT TO DO IN EMERGENCIES 217 Opening a Locked Decklid It is possible for the decklid to become locked if a convertible top system malfunction occurs. If the top is manually moved to the full up or full down position when the hydraulic pressure is relieved, the decklid should unlock.
  • Page 218 I n f o r ma t i o n P r o v i d e d b y :...

  • Page 219: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE CONTENTS ▫ Power Steering Fluid ....233 3.2L Engine ......221 ▫...
  • Page 220 220 MAINTAINING YOUR VEHICLE ▫ Manual Transmission ....245 ▫ Headlights ......260 ▫...

  • Page 221: 3.2L Engine

    MAINTAINING YOUR VEHICLE 221 3.2L ENGINE I n f o r ma t i o n P r o v i d e d b y :...

  • Page 222: Onboard Diagnostic System (Obd Ii)

    222 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! To meet new government regulations and promote cleaner air, your Crossfire is equipped with a sophisti- Prolonged driving with the CHECK ENGINE light cated onboard diagnostic system called OBD II. This on could cause further damage to the emission con- system monitors the performance of the emissions and trol system.

  • Page 223: Emissions Inspection And Maintenance Programs

    MAINTAINING YOUR VEHICLE 223 EMISSIONS INSPECTION AND MAINTENANCE 2. Turn the ignition to the ON/RUN position, but do not PROGRAMS crank or start the engine. In some localities, it may be a legal requirement to pass 3. If you crank or start the engine, you will have to start an inspection of your vehicle’s emissions control system.

  • Page 224: Replacement Parts

    224 MAINTAINING YOUR VEHICLE If your OBD system is not ready, you should see your REPLACEMENT PARTS authorized dealer or repair facility. If your vehicle was Use of genuine Mopar parts for normal/scheduled recently serviced or had a battery failure or replacement, maintenance and repairs is highly recommended to in- you may need to do nothing more than drive your sure the designed performance.

  • Page 225: Maintenance Procedures

    MAINTAINING YOUR VEHICLE 225 However, if a malfunction of these items does occur, it WARNING! could adversely affect the engine or vehicle performance. These items should be inspected if a malfunction is You can be badly injured working on or around a observed or suspected.
  • Page 226 226 MAINTAINING YOUR VEHICLE The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off, or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings.
  • Page 227 MAINTAINING YOUR VEHICLE 227 • Extensive engine idling Change Engine Oil The oil change interval for your Crossfire is initially set at • Driving in dusty conditions 7,000 miles (Canada: 11,000 km). • Short trips of less than 10 miles (16 km) The Flexible Service System (FSS) in your vehicle evalu- •...
  • Page 228 228 MAINTAINING YOUR VEHICLE Engine Oil Selection Materials Added To Engine Oils For best performance and maximum protection under all Do not add materials (other than leak detection dyes) to types of operating conditions, only use synthetic engine engine oil. Engine oil is an engineered product and its oils, approved to MB 229.3 or MB 229.5, such as Mobil 1 performance may be impaired by supplemental addi- SAE 0W-40.
  • Page 229 MAINTAINING YOUR VEHICLE 229 Drive Belts - Check Condition and Tension Engine Air Cleaner Filter At the distance shown in the maintenance schedules, Under normal driving conditions, replace the air filter at check all drive belts for condition and proper tension. each interval called out by FSS.
  • Page 230 230 MAINTAINING YOUR VEHICLE Catalytic Converter CAUTION! The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the Damage to the catalytic converter can result if your catalyst as an emission control device. vehicle is not kept in proper operating condition.

  • Page 231: Ignition Wiring System

    MAINTAINING YOUR VEHICLE 231 In unusual situations involving grossly malfunctioning Ignition Wiring System engine operation, a scorching odor may suggest severe The ignition cables should be kept clean and properly and abnormal catalyst overheating. If this occurs, stop connected. Terminals should be fully seated. Cracked, the vehicle, turn off the engine and allow it to cool.

  • Page 232: Air Conditioner

    232 MAINTAINING YOUR VEHICLE WARNING! CAUTION! Battery posts, terminals and related accessories con- It is essential when replacing the cables on the tain lead and lead compounds. Wash hands after battery that the positive cable is attached to the handling. positive post and the negative cable is attached to the negative post.

  • Page 233: Power Steering Fluid

    MAINTAINING YOUR VEHICLE 233 NOTE: If your air conditioning performance seems Power Steering Fluid lower than expected, check the front of the A/C con- No power steering fluid service is required. The system is denser for an accumulation of dirt or insects. Clean with filled at the factory with Pentosin CHF 11S.

  • Page 234: Chassis Lubrication

    234 MAINTAINING YOUR VEHICLE Before removing the reservoir cap, wipe the outside of Chassis Lubrication the cap and reservoir so that no dirt can fall into the Front Suspension Ball Joints reservoir. There are two front suspension lower ball joints that are The power steering pump has a dipstick.

  • Page 235: Body Lubrication

    MAINTAINING YOUR VEHICLE 235 Body Lubrication lubricant. Repeat this procedure three or four times. Wipe Locks and all body pivot points, including such items as all the lubricant off the key with a clean cloth, to avoid seat tracks, doors, and rear liftgate / decklid hinges, soiling clothing.

  • Page 236: Windshield Wiper Blade Replacement

    236 MAINTAINING YOUR VEHICLE Windshield Wiper Blade Replacement Windshield Washer Reservoir The washer fluid reservoir is located in the engine 1. Lift the wiper arm away from the glass. compartment and should be checked for fluid level at 2. Rotate the blade 45 degrees to gain access to the regular intervals.

  • Page 237: Exhaust System

    MAINTAINING YOUR VEHICLE 237 If you notice a change in the sound of the exhaust system, WARNING! or if exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, Do not overfill the washer reservoir. Do not attempt have a competent technician inspect the complete ex- to fill to the top of the filler neck.

  • Page 238: Cooling System

    238 MAINTAINING YOUR VEHICLE Cooling System Check the front of the radiator and condenser for an accumulation of bugs, leaves, etc. Clean the radiator and WARNING! condenser by gently spraying water from a garden hose at the back of the radiator core. •...
  • Page 239 MAINTAINING YOUR VEHICLE 239 If the solution is dirty and contains a considerable CAUTION! amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to Failure to use the proper antifreeze could cause remove all deposits and chemicals.
  • Page 240 240 MAINTAINING YOUR VEHICLE NOTE: Mixing coolant types other than Mopar prod- WARNING! ucts will decrease the life of the engine coolant and will require more frequent coolant changes. The warning words “DO NOT OPEN WHEN HOT” near the cooling system reservoir cap are a safety Please note that it is the owner’s responsibility to main- precaution.

  • Page 241: Hoses And Vacuum/Vapor Harnesses

    MAINTAINING YOUR VEHICLE 241 • Make sure that the radiator and coolant bottle hoses Points to Remember are not kinked or obstructed. NOTE: When the vehicle is stopped after a few miles/ • Keep the front of the radiator clean. If your vehicle has kilometers of operation, you may observe vapor coming from the front of the engine compartment.

  • Page 242: Brakes

    242 MAINTAINING YOUR VEHICLE Insure nylon tubing in these areas has not melted or Brake and Power Steering System Hoses collapsed. Inspect all hose connections such as clamps When servicing the vehicle for scheduled maintenance, and couplings to make sure they are secure and no leaks inspect surface of hoses and nylon tubing for evidence of are present.
  • Page 243 MAINTAINING YOUR VEHICLE 243 NOTE: Inspection of brake hoses should be done whenever the brake system is serviced and at every engine oil change. WARNING! Worn brake hoses can burst and cause brake failure. You could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately.

  • Page 244: Automatic Transmission

    244 MAINTAINING YOUR VEHICLE Automatic Transmission WARNING! The fluid in the automatic transmission should be changed at 80,000 miles (129,000 km), along with the Use of a brake fluid that may have a lower initial transmission fluid filter. After that, the transmission fluid boiling point or unidentified as to specification, may is filled for life.

  • Page 245: Manual Transmission

    MAINTAINING YOUR VEHICLE 245 Fluid and Filter Changes CAUTION! Automatic transmission fluid and filter should be changed at 80,000 miles (129,000 km). The fluid is then Using a transmission fluid other than the fluid rec- filled for life. ommended by DaimlerChrysler Corporation may cause deterioration in transmission shift quality NOTE: Refer to Section 8 of this manual for Mainte- and/or torque converter shudder.

  • Page 246: Appearance Care And Protection From Corrosion

    246 MAINTAINING YOUR VEHICLE aid in detecting fluid leaks. The use of transmission CAUTION! sealers should be avoided as this may adversely affect seals. Do not overfill. Dirt and water in the transmission can cause serious damage. To prevent dirt and water Appearance Care and Protection from Corrosion from entering the transmission after checking or Protection of Body and Paint from Corrosion...
  • Page 247 MAINTAINING YOUR VEHICLE 247 • Avoid using abrasive compounds and power buffing The most common causes are: that may diminish the gloss or thin out the paint • Road salt, dirt and moisture accumulation. finish. • Stone and gravel impact. CAUTION! •...
  • Page 248 248 MAINTAINING YOUR VEHICLE • Use Mopar touch-up paint on scratches or chips as maintain their luster and to prevent corrosion. Wash soon as possible. Your dealer has touch-up paint to them with the same soap solution as the body of your match the color of your vehicle.
  • Page 249 MAINTAINING YOUR VEHICLE 249 ammonia based cleaners to clean your leather upholstery. CAUTION! Application of a leather conditioner is not required to maintain the original condition. Many wheel cleaners contain acids that may harm the wheel surface. CAUTION! The use of vinyl, leather or plastic protectants may Interior Care cause excessive gloss and/or discoloration of interior Use Mopar Fabric Cleaner to clean fabric upholstery...
  • Page 250 250 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and Cleaning Plastic Instrument Cluster Lenses reducing light output, avoid wiping with a dry cloth. To The lenses in front of the instruments in the vehicle are remove road dirt, wash with a mild soap solution fol- molded in clear plastic.

  • Page 251: Convertible Top Care

    MAINTAINING YOUR VEHICLE 251 CONVERTIBLE TOP CARE Washing CAUTION! CAUTION! • Remove bird droppings immediately. The organic Due not use sharp-edged instruments to remove snow or ice from the soft top. acid can damage the material and cause the top to leak.

  • Page 252: General Cleaning

    252 MAINTAINING YOUR VEHICLE General Cleaning Wet Cleaning Wash with clear water or with a mild detergent and an CAUTION! ample supply of luke warm water by wiping with a soft-bristled brush or sponge from front to rear. Then Do not use any of the following to clean the top: rinse thoroughly with clear water.

  • Page 253: Fuses

    MAINTAINING YOUR VEHICLE 253 FUSES Underhood Accessory Fuse Block Fuses The underhood accessory fuse block fuses are located under the hood on the driver’s side, between the brake master cylinder and the left front fender. To remove the lid, squeeze the tabs together located at the front of the fusebox.
  • Page 254 254 MAINTAINING YOUR VEHICLE CAUTION! When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it shows a problem in the circuit that must be corrected.
  • Page 255 MAINTAINING YOUR VEHICLE 255 Underhood Accessory Fuse Block Fuses Cavity Fuse Circuits Cavity Fuse Circuits 15 Amp Radio Blue 5 Amp Garage Door Opening Signal, Beige Tire Pressure Control and Seat 5 Amp Control Unit Airbag Heater Beige 5 Amp Control Unit Airbag 5 Amp Speed Control...
  • Page 256 256 MAINTAINING YOUR VEHICLE Cavity Fuse Circuits Cavity Fuse Circuits 40 Amp Electronic Stability Program 15 Amp Cigar Lighter, Glove Compart- Orange Blue ment Light 40 Amp Power Window, Front 15 Amp Wiper, Washer Pump, Headlight Orange Blue Flasher 30 Amp Wiper Motor 5 Amp Control Unit...

  • Page 257: Relay Control Module Fuses

    MAINTAINING YOUR VEHICLE 257 Relay Control Module Fuses Relay Control Module Fuses The relay control module fuses are located in the Control Cavity Fuse Circuits Module Box next to the battery in the engine compart- 15 Amp Traction System ment. Slide the control module box cover retaining clips Blue forward and lift the cover from the control module box to 15 Amp...

  • Page 258: Interior Fuses

    258 MAINTAINING YOUR VEHICLE Cavity Fuse Circuits 15 Amp Fuel Pump Blue 15 Amp Horn Blue Interior Fuses Interior Fuses Cavity Fuse Circuits Not Assigned 15 Amp Brake Lamp/Speed Control Blue 7.5 Amp Right High Beam, High Beam Brown Indicator Light The fuse access door is located on the end of the 15 Amp Reverse/Turn signal Light...

  • Page 259: Replacement Bulbs

    MAINTAINING YOUR VEHICLE 259 REPLACEMENT BULBS Cavity Fuse Circuits 15 Amp Right Low Beam Interior Light Bulbs Blue For lighted switches and interior lights, see your autho- 7.5 Amp Right Parking/Tail Light Side rized dealer for servicing requirements. Brown Marker Exterior Light Bulbs 15 Amp Left Low Beam...

  • Page 260: Exterior Light Bulb Service

    260 MAINTAINING YOUR VEHICLE EXTERIOR LIGHT BULB SERVICE 3. Release the spring clamps holding the bulb in place, and pull out the bulb. Replace the bulb and reverse the Headlights removal procedure exactly. WARNING! Halogen lamps contain pressurized gas. A bulb can explode if you: •...

  • Page 261: Front Turn Signal And Parking/Standing Lights

    MAINTAINING YOUR VEHICLE 261 Front Turn Signal and Parking/Standing Lights • Twist the bulb socket counterclockwise and pull out. Push the bulb into the socket, turn counterclockwise and remove. • Replace the bulb, push in and twist clockwise. Rein- stall the socket, and turn clockwise. Front and Rear Sidemarker Lights 1.

  • Page 262: License Plate Light

    262 MAINTAINING YOUR VEHICLE 4. Replace the access door in the trim panel. NOTE: Always test the operation of all lights after service operations have been performed to validate an effective repair. License Plate Light 1. Remove the two lens assembly mounting screws. Headlight Aiming 2.

  • Page 263: Vehicle Storage

    MAINTAINING YOUR VEHICLE 263 • If the vehicle will be subjected to freezing tempera- the vehicle and then readjust the headlights to the original position. If any further adjustments are neces- tures, remove the battery and store it in a dry, well- sary contact your manufacturer’s dealer.
  • Page 264 264 MAINTAINING YOUR VEHICLE • Move the wiper blades away from the windshield. in hot temperatures. If battery voltage drops below 12.40, follow the battery recharge procedure in the Service NOTE: To help prevent the battery from discharging Manual. during shorter periods of inactivity, perform the follow- •...

  • Page 265: Specifications

    MAINTAINING YOUR VEHICLE 265 SPECIFICATIONS Performance Specifications (approximate) Maximum Speed 150 mph (242 km/h) Engine Specifications Acceleration 0–60 mph 6.5 seconds Engine Size 195.2 CID (3.2 Liters) 1/4 mile time 14.9 seconds at 96 mph Mode of Operation 4–stroke engine, gasoline (154 km/h) injection Gear Ratios - 6-Speed Manual Transmission...
  • Page 266 266 MAINTAINING YOUR VEHICLE Body Specifications Front Ground Clearance 5.0 in. (127 mm) Overall Length 159.8 in. (4058 mm) Rear Ground Clearance 5.8 in. (147 mm) Maximum Width 69.5 in. (1766 mm) Turning Radius 32.2 ft. (9.8 m) Maximum Width With 76.9 in.

  • Page 267: Fluid Capacities

    MAINTAINING YOUR VEHICLE 267 FLUID CAPACITIES U.S. Metric 15.8 Gallons 60.0 Liters Fuel (Approximate) Fuel Tank Reserve 2 Gallons 7.5 Liters Engine Oil (with filter) 3.2 L Engine 8.5 Qts. 8.0 Liters Cooling System * 3.2 L Engine 11.8 Qts. 11.2 Liters Manual Transmission 1.9 Qts.

  • Page 268: Recommended Fluids, Lubricants And Genuine Parts

    268 MAINTAINING YOUR VEHICLE RECOMMENDED FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Use coolant approved to MB 325.0, such as Valvoline GO5, or an equivalent extended life coolant. Engine Oil Only use synthetic engine oils, approved to MB 229.3 or MB 229.5, such as Mobil 1 SAE 0W-40.

  • Page 269: Chassis

    MAINTAINING YOUR VEHICLE 269 Chassis Component Fluids, Lubricants and Genuine Parts Automatic Transmission Only use ATF approved to MB 236.10, MB 236.12. Synthetic Dexron III Transmission Fluid may be substituted. Brake Master Cylinder Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with: mini- mum dry boiling point (ERBP) 500°F (260°C), minimum wet boiling point (WERBP) 356°F (180°C), maximum viscosity 1500 mm /s, conforming to...

  • Page 270: Body

    270 MAINTAINING YOUR VEHICLE Body Component Fluids, Lubricants and Genuine Parts Hinges: Door Mopar Spray White Lube Liftgate / Decklid Mopar Multi-Purpose Lube NLGI Grade 2 EP, GC-LB Hood Springs and Links Mopar Spray White Lube Latches: Liftgate/Decklid Mopar Spray White Lube Hood/Safety Catch Mopar Multi-Purpose Lube NLGI Grade 2 EP, GC-LB Door Mopar Spray White Lube Seat Regulator and Track...
  • Page 271 MAINTENANCE SCHEDULES CONTENTS Introduction ......272 Regular Check-Ups ..... 278 ▫...

  • Page 272: Introduction

    272 MAINTENANCE SCHEDULES INTRODUCTION WARRANTY This is intended as a guide to the service requirements of The DaimlerChrysler Corporation Dealer network is at your vehicle. your disposal for maintenance work. Each of these work- shops has the equipment and tools, the specially trained, It contains all necessary instructions concerning service skilled and experienced personnel and receives regular intervals and operations which have to be carried out.

  • Page 273: Emission Control System Maintenance

    MAINTENANCE SCHEDULES 273 The use of Special lubricant additives is not recom- Inspection and service also should be done any time a mended. The use of such additives may affect your malfunction is suspected. warranty rights. With regard to legal stipulations con- NOTE: Maintenance, replacement, or repair of the cerning emissions control, please note that engines have...

  • Page 274: Scope Of Work For "A" Schedule

    274 MAINTENANCE SCHEDULES • Headlamps and exterior lighting Your Flexible Service System (FSS) — see Understanding Your Instrument Panel section — should give you an • Windshield wipers and washer system exact indication of when your vehicle should be sched- uled for service and which schedule to follow.

  • Page 275: Scope Of Work For "B" Schedule

    MAINTENANCE SCHEDULES 275 SCOPE OF WORK FOR “B” SCHEDULE Inspection MAINTENANCE SERVICE • Check front and rear brake pads for lining thickness Oil Change • Check condition of front and rear brake discs • Change oil and replace filter • Check tires for damage and general condition Maintenance •...

  • Page 276: Fss System

    276 MAINTENANCE SCHEDULES Fluid Levels the service interval beyond 7,000 miles (Canada: 11,000 km). If ANY of the following apply to your driving, the Check fluid levels for the following systems and correct if oil change interval can be reduced significantly: necessary.
  • Page 277 MAINTENANCE SCHEDULES 277 This second symbol represents Service B. Ser- NOTE: When disconnecting vehicle battery for one or vice B rotates with Service A and includes more days at a time, such days will not be counted. Any additional service tasks. such days not counted by FSS can be added by your authorized dealer.

  • Page 278: Regular Check-Ups

    278 MAINTENANCE SCHEDULES • Check the windshield washer solvent and add if REGULAR CHECK-UPS To maintain the safe operation of your vehicle, it is required. recommended that you perform the following tasks on a • Inspect wiper blade condition. regular basis (i.e., weekly or whenever the vehicle is •...

  • Page 279: Additional Periodic Maintenance

    MAINTENANCE SCHEDULES 279 • Change the automatic transmission fluid and filter. Additional Periodic Maintenance The following maintenance items should be performed Use the recommended automatic transmission fluid. during the scheduled maintenance nearest the time After this change it is filled for life. The manual elapsed and/or distance shown.

  • Page 280: Special Maintenance Requirements

    280 MAINTENANCE SCHEDULES SPECIAL MAINTENANCE REQUIREMENTS ENGINE OIL CHANGE AND FILTER REPLACEMENT Coolant The recommended oil and filter change interval is based Have the corrosion inhibitor/antifreeze concentration in on FSS or 1 year. Please refer to the heading FSS System the coolant checked before the onset of winter (once a in this section for a full description of the use and year in countries with high prevailing temperatures).

  • Page 281: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Reporting Safety Defects ....285 Vehicle ......282 ▫...

  • Page 282: Suggestions For Obtaining Service For Your Vehicle

    282 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR minimal daily charge. If you need a rental, it is advisable YOUR VEHICLE to make these arrangements when you call for an ap- pointment. Prepare For The Appointment If you’re having warranty work done, be sure to have the IF YOU NEED ASSISTANCE right papers with you.
  • Page 283 IF YOU NEED CONSUMER ASSISTANCE 283 This is why you should always talk to your dealer’s DaimlerChrysler Motors Corporation Customer service manager first. Most matters can be resolved with Center this process. P.O. Box 21–8004 Auburn Hills, MI 48321–8004 • If for some reason you are still not satisfied, talk to the Phone: (800) 992-1997 general manager or owner of the dealership.
  • Page 284 284 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech DaimlerChrysler Corporation Service Contract Na- Impaired (TDD/TTY) tional Customer Hotline at 1-800-521-9922. To assist customers who have hearing difficulties, the The DaimlerChrysler Corporation will not stand behind DaimlerChrysler Corporation has installed special any service contract that is not the DaimlerChrysler TDD (Telecommunication Devices for the Deaf) equip-...

  • Page 285: Warranty Information

    IF YOU NEED CONSUMER ASSISTANCE 285 WARRANTY INFORMATION To contact NHTSA, you may either call the Auto Safety See the Warranty Information Booklet for the terms and Hotline toll-free at 1-800-424-9393 (or 366-0123 in Wash- provisions of DaimlerChrysler’s warranties applicable to ington, D.C.

  • Page 286: Publication Order Forms

    Visa, Mas- of service and engineering specialists to acquaint you tercard, American Express, and Discover orders are ac- with specific Chrysler group vehicles. Included are cepted. If you prefer mailing your payment, please call starting, operating, emergency and maintenance pro- for an order form.

  • Page 287: Department Of Transportation Uniform Tire

    IF YOU NEED CONSUMER ASSISTANCE 287 DEPARTMENT OF TRANSPORTATION UNIFORM Traction Grades TIRE QUALITY GRADES The traction grades, from highest to lowest, are AA, A, B, The following describes the tire grading categories estab- and C. Those grades represent the tire’s ability to stop on lished by the National highway Traffic Safety Adminis- wet pavement as measured under controlled conditions tration.

  • Page 288: Temperature Grades

    288 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat when tested under a tire that is properly inflated and not overloaded.
  • Page 289 INDEX I n f o r ma t i o n P r o v i d e d b y :...
  • Page 290 290 INDEX ABS (Anti-Lock Brake System) ... . . 118 Automatic Transmission ....149,244 Adding Engine Coolant (Antifreeze) ..239 Fluid and Filter Changes .
  • Page 291 INDEX 291 Capacity, Cargo Weight ....191 Converter, Catalytic ..... 198 Carbon Monoxide Warning .
  • Page 292 292 INDEX Defroster, Windshield ..... 56 Oil Change Interval ....227 Disposal Oil Selection .
  • Page 293 INDEX 293 Octane Rating ......186 Ignition Fuses ....... . 253 Key .
  • Page 294 294 INDEX Lap/Shoulder Belts ..... . 24 Capacities ......191 Light Bulbs .
  • Page 295 INDEX 295 Rearview ......77 Pets, Transporting ..... . . 54 Vanity .
  • Page 296 296 INDEX Restraints, Child ......47 Snow Chains (Tire Chains) ....183 Restraints, Infant .
  • Page 297 INDEX 297 TIREFIT ......195 Trailering ......192 Tires .
  • Page 298 298 INDEX Warnings and Cautions ....6 Windshield Defroster ..... 56 Warranty Information .
  • Page 299 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS KeysObtaining Replacement KeysIgnition Key RemovalKey-In-Ignition ReminderGLOVE COMPARTMENT LOCK DOOR LOCKS Central Locking SwitchAutomatic Central LockingGeneral Notes On the Central Locking SystemEmergency Unlocking FeatureStart LockoutREMOTE KEYLESS ENTRY To Unlock the DoorsTo Lock The DoorsPanic AlarmTo Use the Panic AlarmGeneral InformationTransmitter Battery ServiceSECURITY ALARM SYSTEM Tow-Away AlarmDECKLID INTERNAL EMERGENCY RELEASE - ROADSTER POWER WINDOWS Power Window Operation With The Convertible Top Switch (Roadster Only)REAR LIFTGATE/DECKLID RELEASE OCCUPANT RESTRAINTS Lap/Shoulder BeltsSeat Belts and Pregnant WomenSeat Belt ExtenderSupplemental Restraint System (SRS) - Airbag Child RestraintENGINE BREAK-IN RECOMMENDATIONS SAFETY TIPS Exhaust GasSafety Checks You Should Make Inside the VehiclePeriodic Safety Checks You Should Make Outside the VehicleUNDERSTANDING THE FEATURES OF YOUR VEHICLE CONVERTIBLE TOP OPERATION To Lower...

Table of Contents