Chrysler Conquest 1988 Service Manual page 1150

21-26,.
MANUAL TRANSMISSION
- Mainshaft Assembly
(4) insert th~t%elkeys in@ groove of synchronizer hub.
(5) Install two synchronizer springs to synchronizer.
When synchronizer springs are installed, make sure that
front and rear ones are not faced in same direction. ._
110013
3rd-4th
synchroniz
hub
Mainsha
I
Snap ring
-
.-
16. INSTALLATlON OF 3RD-4TH SYNCHRONIZER HUB / 12.
SNAP RING
(1) Assemble Sd-4th synchronizer positioning hub toward
correct direction. ~
(2) As for mi;iir%haft fronfend snap ring, select and install
one of such thickness that will minimize -clearance _
between snap ring and hub. In other words, install the
thickest snap ring that fits in snap ring groove.
(3) Make sure that 3rd speed gear turns smoothly.
13402i
9. INSTALLATION OF IST-END SYNCHRONIZER HUB / 8.
SYNCHRONIZER KEY / 7. SYNCHRONIZER SPRING / 5.
IST-2ND SYNCHRONIZER SLEEVE
Assemble Ist-2nd synchronizer in the same manner as tor
the 3rd-4th synchronizer described in the preceding step.