Chrysler Conquest 1988 Service Manual page 501

-
AUDIO SYSTEM
- Noise Suppression
NOISE SUPPRESSION CHART
Symptom
Unusual noise related to
engine speed
Noise source
Engine
Remedy
Securely ground the engine, frame and/or body and engine
hood.
Ew
A Ground wire
"Clatter" noise related
to the flashing of turn-
signal lights
Turn-signals
16E71(
Connect a 0.5 pF noise-suppression capacitor to the B terminal
of the flasher unit.
Flasher
-0
unit
72
.-
0.5
PF noise-suppression
capacitor
Abnormal noise when
the horn is operated
Horn 1. Connect a 0.5 yF noise-suppression capacitor to the
+ B-terminal of the horn.
2. For an FM radio, connect an LC filter to the horn
terminals.
16E71:
Horn
LC filter
a-
16E71:
Noise when the wind-
shield washer operates
Washer motor 1. Connect a 0.5 I.IF noise-suppression capacitor between
the terminal of the washer motor and the power source
wire.
2. For an FM radio, connect an LC filter between the terminal
of the washer motor and the power source wire.
Unusual noise when the
engine is started
pgjiqj-g
=
16F671
Coolant tempera-
Connect a 0.1 PF noise-suppression capacitor to the terminal
ture gauge unit of the coolant temperature gauge unit.
A9
0.1
PF noise-suppression
I
capacitor
c
7
16F67.2