Chrysler Conquest 1988 Service Manual page 693

EMISSION CONTROL SYSTEMS -
Evaporative Emission Control System
25-21
REMOVAL
(I) When removing the therm0 valve, do not use wrenches or ~1
other tools on the resin part.
(2) When disconnecting the vacuum hose, put a mark on the I-
hose so that it may be reconnected at original position.- '--
INSTALLATION
(I) When installing, apply sealant (3M NUT Locking No. 4171 ~.
or equivalent) to the threads and tighten to 20 to 40 Nm (15--- '=
to 30 ft.lbs.).
(2) When installing the therm0 valve, do not use wrenches or
other tools on the resin part.
OVERFILL LIMITER (TWO-WAY VALVE)
N25lBEB
Refer to GROUP 14 FUEL SYSTEM - Fuel Tank for the
inspection of the overfill limiter (two-way ~valve).